Stainless steel washers are used to close and seal the connections between two components or fasteners. Depending on the need, different types, materials and sizes of washers are used. Jignesh Steel is a large SS Washer Manufacturer and we produce washers in different Washer Material Grades and sizes. We produce washers ranging from SS material to commercially pure metal alloy washers. The Washer Material Specification is according to the application where it is used. Usually, the ASTM Stainless Steel Washers are used with the same grade of material components to make sure the integrity and durability of the connections. Sometimes, higher wear and tear washers are used ensure the connections is safe. There are different types of washers. The Stainless Steel Fender Washers are used to distribute the force equally over the surface, so that they are proportionally larger in outer diameter than the inner diameter.
The Stainless Steel Internal Tooth Lock Washers have teeth in the inner diameter so that they can hold the bolt tight. There are Stainless Steel External Tooth Lock Washers as well which apply their strut action not to lose the nuts. The Stainless Steel Cup Washer is the most commonly used and it eliminates the unnecessary gap between the thread and the nut. We also supply Stainless Steel Beveled Washer and other types. Please contact us for further washer types and pricing information.
Stainless Steel Washer
Stainless Steel Cup Washer
Stainless Steel Fender Washer
Stainless Steel Square Washer
Stainless Steel Lock Washer
Stainless Steel Penny Washer
Material | Price in India |
---|---|
Stainless Steel Split Washer (Box of 100pcs) | INR 99/- |
Washer Type | Size | Hardness/ Tensile Strength | Standard |
---|---|---|---|
Square Section Spring Washer | 3 to 39mm | HV (430 to 530) | DIN 7980 |
Flat Section Spring Washer | 3 to 39mm | HV (430 to 530) | DIN 127 B |
Hardened Washer | 12 to 30mm | HV (300 to 370) | IS 2016 |
Hardened Steel Washer | 12 to 56mm | Rockwell 26 to 45 (HDG) Rockwell 38 to 45 (Coated) |
ASTM F436M |
USS Plain Washer | 1/4 to 2 Inch | HRC 38-45 | ASME B18.21.1-A |
SAE Plain Washer | 1/4 to 1 1/2 Inch | HRC 38-45 (Coated) HRC 26-45 (HDG) |
ASME B18.21.1-A |
Spring-Lock Washer | 1/4 to 1 1/2 Inch | HRC 38-46 | ASME B18.21.1 |
Hardened Washer | 1/4 to 1 3/8 Inch | HRC 38-45 (Coated) HRC 26-45 (HDG) |
ASTM F436 |
Grades | 321, 410, 410S, 347, 347H |
Washer size | M2-M100 |
SS Washer Length | 5-300mm |
Packaging | Comes in boxes of 50, 100, 200, Custom |
ASME Standard (American) | ASME/ ANSI B18.21.1 |
DIN Standard (German) | DIN 125 A, DIN 127 B, DIN 7980 |
Finish | Self color, Polish, Passication |
Test performed | Hardness test, Torsion test |
Grades | SUS201, SUS304, SUS316, SS 316H Washer, A2-70, A4-70, A4-80, Grade 4.8, Grade 8.8, Grade10.9, Grade 12.9 |
Thread | Coarse, Fine |
Types of Stainless Steel Washer |
|
Material | Specification |
---|---|
Carbon Steel Washer | ASTM F3125 A325 Type 1, A490 Type 1, 2 and 2, A325 Type 2 and 3 |
Stainless Steel Washer | A2 - 70/80, A4 - 70/80, ASTM A193 B16, SA 193 B7, SS 304, 304L, 316, 316L, 410, 410S |
SAE | J429 5, 5.1, 5.2, 8, 8.2 |
Alloy Steel Washer | ASTM A354 BC, A354 BD, A354 BB |
Neoprene Washers
Belleville Washer
Dock Washer
Square Bevel Washer
Counter Sunk Finishing Washer
A4-70 washer
M12 Stainless Steel DIN 988A4-80 washer
Stainless Steel 18-8A2-70 washer
M20 M30 SSStainless Steel Countersunk Washer
Stainless steel A4-80 DIN 125Stainless Steel Belleville Washer
M4 M5 M6 M7 A2 A4Stainless Steel Shim Washer
Stainless steel M6 A2-70 A4-80Stainless Steel Square Plate Washer
DIN 6796 Stainless steelStainless Square Washer
DIN 434 Square beveled M3 M2 M5 M8 SSBlack Oxide Stainless Steel Washer
DIN 125 SS grade 8.8Stainless Steel Machine Washers
M10 M20 Stainless steel DIN 125Polished Stainless Steel Washer
SS DIN 125A M6, SS 316HStainless Steel Ring Washers
M6 M8 A2 A4 Stainless steelStandard | Description |
---|---|
AS 1237.1-2002 | Plain washers |
AS 1237.1-2002 | Small plain washers |
ASTM F436-2010 | Extra Thick clipped washers |
ASTM F436M-2010 | Clipped washers |
ANSI B18.2.6-2003 | Steel Circular clipped washers |
ANSI B18.22.1A-1981 | Type A Plain washers |
ANSI B18.22.1B-1981 | Type B Plain washers |
ANSI B18.22.1A-1965 | Type A Plain washers |
ANSI B18.22.1B-1965 | Type B Plain washers |
DIN 125-2 | Type A washers |
DIN 125-2 | Type B washers |
A2 Fender Washer Size | Inner Diameter (Inch) | Outer Diameter (Inch) | Thickness (Inch) |
---|---|---|---|
M3 x 9M | 3.2 | 9.0 | 0.8 |
M4 x 12M | 4.3 | 12.0 | 1.0 |
M5 x 15M | 5.3 | 15.0 | 1.2 |
M6 x 18M | 6.4 | 18.0 | 1.6 |
M8 x 24M | 8.4 | 24.0 | 2.0 |
M10 x 30M | 10.5 | 30.0 | 2.5 |
M12 x 37M | 13.0 | 37.0 | 3.0 |
M14 x 44M | 15.0 | 44.0 | 3.0 |
M16 x 50M | 17.0 | 50.0 | 3.0 |
18-8 Stainless Steel Finishing Cup Washer Size | ID (Inner Diameter) | OD (Outer Diameter) | Thickness in Inch |
---|---|---|---|
#4 | 0.159" | 0.379" | 0.082" |
#6 | 0.176" | 0.434" | 0.087" |
#8 | 0.205" | 0.538" | 0.104" |
#10 | 0.251" | 0.603" | 0.102" |
#12 | 0.265" | 0.682" | 0.134" |
1/4" | 0.316" | 0.791" | 0.157" |
5/16" | 0.344" | 0.892" | 0.161" |
3/8" | 0.363" | 1.122" | 0.225" |
|
|