Xylan Coated B7 Studs, Teflon Nut Bolt & washer supplier in India
Generally, ceramic, zinc flake, and Xylan or PTFE Coated Bolts and Nuts are coated by spraying. Any conventional air spraying method covers the surface of these screws, followed by a curing process. The follow up curing process sets in the coat and increases the endurance of the finish. PTFE Coating Bolts, Stud Bolt & Nut improves the lifespan.
PTFE coated Bolts and Nuts are known for exceptional corrosion resistance, low coefficient of friction, consistent tensioning and subsequent ease of installation and removal. Extensive testing and field use have proven that the future of Teflon Coated B7 Stud Bolts lies with Fluoropolymer coatings. Earlier hot dip, galvanized, cadium or zinc plated Studs were considered the standard. But these coatings are not suitable in corrosive atmospheres prevalent in many industries. PTFE coated B7 studs with 2H nuts are widely used in various applications.
The process to electroplate a fastener starts with its cleaning its surface in an alkaline detergent solution. After cleansing its surface, the screws get treated with an acid. The acid removes any rust or scales present on the surface. Thorough sterility is a prerequisite for this process as the molecular layers of oil or rust can prevent adhesion of any coating to the metal surface. While the main objective of applying a coat on the fastener, is its protection; there are instances during cleaning or pre-cleaning, wherein there is the absorption of some hydrogen content. If these hydrogen absorbed screws are a part of a sour-well environment, there is a risk of the fastener becoming susceptible to Hydrogen embrittlement; And PTFE Coated Fasteners are rendered useless. Fasteners that belong to strength classes 10.9 and above, as well as USA grade 8, are most likely to witness hydrogen embrittlement. To prevent this, the coated undergoes baking, although complete elimination of Hydrogen embrittlement in screws is not a guarantee.
ASTM A194 Grade 2H Heavy Hex PTFE Coated Nuts
1070 Coated Grade 8.8 Studs and Nuts
PTFE Fluorocarbon Coated A193 B7 Stud Bolt With 2h Nut
PTFE Coated ASTM A193 B7 Stud Bolt With 2h Hex Nuts
A320-L7 PTFE Coated Hex Bolts
PTFE Coated 8Mm Threaded Rod and Nut
Teflon Coated A193 B7 Ptfe Stud Bolt
PTFE Coated Washer
Teflon Coated Studs, PTFE Coating Bolts and Nuts, Washers, all blue in color, test done as per ASTM B117
Table of contents
Polytetrafluoroethylene PTFE Coated Stud Bolt & Screws manufacturer in India
| PTFE Coated A193 B7M HEX BOLT, Size 1/2 X 45MM | 260/Pcs |
| PTFE Coated A193 GR.B7M STUD BOLT with 2 A194 GR. 2HM HEX NUTS, Size 1/2 X 130MM | 132/Pcs |
Call us or send us an email to sales@jigneshsteel.com for more details.
PTFE Bolts means non-stick coatings, PTFE Coated studs and threaded rod are corrosion resistant.
| PTFE Coated Studs & Bolts | Available in blue, green & red color |
| PTFE coating thickness | 20 ± 5 microns to 45± 5 microns thick. |
| Temperature range | up to + 500°F |
| Coating Corrosioin Resistance | up to 3,000 hrs (Nuts not frozen) Salt Spray (ASTM B117) |
| Hardness Value | 5H - 6H (ASTM D3363-92A) |
| Coating Friction Coefficient | 0.06 - 0.08 |
| Nominal Thickness | 0.001” (1 mil) |
| Impact Strength | 160 in lb (ASTM D2794-93) |
| Elongation | 35%-50% |
| Adhesion | 5B (ASTM D3359-95) |
| Tensile Stress | 4,000 psi |
| Working Pressure | Up to 100,000 psi |
| SAE Specification |
|
| Teflon Coated B7 Stud Bolts Size Metric |
|
| PTFE Coated Bolts and Nuts Size Inch |
|
| PTFE Coated Fasteners International Specification | IS, ANSI, ASTM, DIN, ISO, JIS, GB, ASME, BS, UNI, CSN, EU, IFI, PN, |
| ASME B18.31.2 Xylan Bolts Standard |
|
| PTFE U-Bolt Standard Sizes | M10, M4, M16, M36 M2.5, M6, M30, M12, M8, M14, M2, M3, M20, M24, M5 to M160 |
| Blue Teflon Coated Bolts Threads | Unified national coarse (UNC), Unified national fine (UNF), Unified national extra fine (UNEF), UNJC and UNJF threads, UNK threads, UNR threads, Constant-pitch threads |
| PTFE Hex Bolt Head Drive | Phillips, Slotted, Phillips/Slot, Six-Lobe |
| MTC (Manufacturer Test Certificate) | EN 10204 / 3.1 |
| Xylan Coated B7 Studs Production Process |
|
| Teflon Coated Hex Head Bolts Packing |
|
| Free Sample | Yes if we have in stock |
| Payment Terms | Paypal, Western Union, T/T (Telegraphic Transfer or Wire Transfer), L/C or Trade Assurance 30% deposit & balance before shipping |
| Preferred PTFE Coated Nut Bolt Drawing Formats | JPEG, PDF, CAD, STP, IGS |
| Manufacturing Process |
|
| Delivery Time | 7-15 working days as usual, It will based on the detailed order quantity. |
| Port of Dispatch | Mumbai or Kalamboli ports in Maharashtra state of India |
| ASTM A307 Grade A Teflon Bolts Plating Specifications |
|
Specification of Xylan® Coating
| Grades |
|
| Tensile Stress (ASTM D1708) | 4000 - 5000 psi |
| Impact Strength (ASTM D256) | 13 ft - lb/in |
| Elongation (ASTM D1457) | 50% |
| Coefficient of Friction (ASTM D1894) | .15 - .35 static |
| Hardness Value (ASTM D2240) | 60 - 90 HB (shore D) |
| Abrasion Resistance Property (Tabor) | > 15 mg |
| Water Absorption (ASTM D570) | < .03 % |
| Dielectric Stress (ASTM D149) | 1400 volts per mil |
| Chemical Resistance (ASTM D543) | good |
| Temperature Range | -100°F to 500°F max |
| Melting Range | n/a |
| Thermal Conductivity Value | n/a |
| Salt Spray Resistance (ASTM B117) | excellent |
| Thickness of coating | .0008" - .002" |
Check PTFE Coated heavy hex bolts, B7 stud, Nut Bolt specification and Price List ex Mumbai
PTFE Coated Fasteners
Teflon Coated B7 Stud Bolts
PTFE Coated Bolts and Nuts
ASME B18.31.2 Xylan Bolts
PTFE U-Bolt
Blue Teflon Coated Bolts
Teflon Coated Washers
PTFE Hex Bolt
Xylan Coated B7 Studs
Teflon Coated Hex Head Bolts
PTFE Coated Nut Bolt
ASTM A307 Grade A Teflon Bolts
| PTFE Coated Carbon Steel Nut Bolt | AISI 1018, AISI 1045, AISI 1117, AISI 12L14, AISI 1215, ASTM A36, ASTM A29, A108, A549, SAE J429, ASTM A307 Grade A/ B/ C PTFE Coated Fasteners |
| Teflon Coated High Tensile Bolts | PTFE Coated Grade 4.8, grade 8.8, grade 10.9, grade 12.9, grade 4.6, Grade 5.8, Grade 9.8 Studs and Nuts |
| ASTM Standard | Blue Teflon Coated ASTM A320, A325, A36, A320 L7 , L7m, A320 Grade B8, A320 B8m, A307, A540, A563, A354, A490, A593, F593C, F593D, F593G Bolts |
| Alloy Steel Xylan Coated Studs | Xylan Coated AISI 4140, AISI 4130, ASTM A193 B7/ B8 / B8M/ B8 Class 2/ B8M Class 2, ASTM A320 L7/ L43 Fasteners |
- Phenolic Coatings
- Epoxy Coatings, Air Dry
- ECTFE/Halar Coating
- Fluoropolymer Coatings
- Inorganic Zinc Coating
- Ceramic Epoxy Coating
- Phosphate Coatings
- Epoxy Coatings, Thermal Cure
- Xylan Coatings
- Polyphenylene Sulfide/Ryton
- FEP Coating
- Molybdenum Disulfide Coatings
- PVDF/Kynar Coating
| PTFE COATED BOLT SIZE |
Torque Chart FT-LBS | ||
|---|---|---|---|
| 30% Initial Torque |
70% Torque |
100% Final Torque |
|
| 1/2 | 12 | 29 | 41 |
| 9/16 | 18 | 41 | 59 |
| 5/8 | 24 | 57 | 82 |
| 3/4 | 43 | 101 | 145 |
| 7/8 | 70 | 163 | 233 |
| 1 | 105 | 245 | 350 |
| 1.1/8 | 154 | 359 | 513 |
| 1¼ | 217 | 505 | 722 |
| 1.3/8 | 294 | 685 | 979 |
| 1½ | 388 | 905 | 1292 |
| 1.9/16 | 441 | 1030 | 1471 |
| 1.5/8 | 501 | 1169 | 1670 |
| 1¾ | 631 | 1471 | 2102 |
| 1.7/8 | 783 | 1827 | 2610 |
| 2 | 960 | 2240 | 3199 |
| 2¼ | 1388 | 3238 | 4626 |
| 2½ | 1923 | 4487 | 6410 |
| 2¾ | 2341 | 5462 | 7802 |
| 3 | 3061 | 7143 | 10204 |
| PTFE COATED BOLT SIZE |
Torque Chart Nm | ||
|---|---|---|---|
| 30% Initial Torque |
70% Torque |
100% Final Torque |
|
| 1/2 | 16 | 39 | 56 |
| 9/16 | 24 | 56 | 80 |
| 5/8 | 33 | 77 | 111 |
| 3/4 | 58 | 137 | 197 |
| 7/8 | 95 | 221 | 316 |
| 1 | 142 | 332 | 475 |
| 1.1/8 | 209 | 487 | 696 |
| 1¼ | 294 | 685 | 979 |
| 1.3/8 | 399 | 929 | 1327 |
| 1½ | 526 | 1227 | 1752 |
| 1.9/16 | 598 | 1396 | 1994 |
| 1.5/8 | 679 | 1585 | 2264 |
| 1¾ | 856 | 1994 | 2850 |
| 1.7/8 | 1062 | 2477 | 3539 |
| 2 | 1302 | 3037 | 4337 |
| 2¼ | 1882 | 4390 | 6272 |
| 2½ | 2607 | 6084 | 8691 |
| 2¾ | 3174 | 7405 | 10578 |
| 3 | 4150 | 9685 | 13835 |
- Oil & Gas Industries
- Chemical Industry
- Petroleum Industries
- Nuclear Energy Sector
- Defence Industry
- Aerospace Industry
Measuring Instruments and Equipment
- Micrometer
- Thread gauge
- Smooth plug gauge
- Roughness tester
- Image measuring instrument
- Coordinate Measuring Machine
- Routine inspection of calipers
Please note: Teflon® and Xylan® brand originally owned by Dupont.
- Stainless Steel Bolts
- Stainless Steel Nut
- Stainless Steel Screw
- Stainless Steel Washer
- 17-4 PH Stainless Steel Bolts
- A286 Stainless Steel Fasteners
- Duplex 2205 Bolts
- Super Duplex Bolts
- Nickel Alloy Fasteners
- Titanium Bolts
- Silicon Bronze Bolts
- Copper Bolts
- High Tensile Fasteners
- Carbon Steel Fasteners
- Alloy Steel Bolts
- Aluminum Fasteners
- Phosphor Bronze Fasteners
- Phosphor Bronze Washers
- Aluminium Bronze Fasteners
- Copper Nickel Fasteners
- Mp35n Bolts
- PTFE Coated Bolts
- Types of Fasteners
- Fastener Standards
- Nut Bolt Weight Calculator
- Stud weight calculator
