UNS N05500 Hex Bolts and Monel K500 Fasteners manufacturer in India
Jignesh Steel is well known Monel Fasteners suppliers in Mumbai. It is available in various dimensions, sizes, shapes, and thickness and also as per the requirement of the customer. Our product is been manufactured as per national and international standards and specifications in order to maintain the quality standard of the Monel Fasteners. We never compromise with the quality while manufacturing our products. Monel Bolts is a form of threaded fastener with an external male thread which requires a matching pre-formed female thread such as a nut. It is very closely related to Monel screws. It is fabricated from the group of nickel alloys, which is primarily composed nickel of 52 to 67% and copper, with small amounts of iron, silicon, manganese and carbon. Monel Screws are stronger than pure nickel screws, Monel alloys screws are corrosion resistant to by many agents, including rapidly flowing seawater and it can be fabricated readily by hot- and cold-working, welding, and machining.
Monel Nuts provides an excellent mechanical properties at subzero temperatures. Its strength and hardness increase with only slight impairment of impact resistance or ductility. It does not undergo a ductile-to-brittle transition even when it is cooled to the temperature of liquid hydrogen. Monel Flat Washers is used to increase the size bearing surface area of a screw, and reduce the surface pressure applied on the fastened object. Its looseness can result when the bearing surface sinks under the surface pressure, so using it can reduce the surface pressure is very effectively. Monel K500 Fasteners has excellent corrosion resistance characteristic with greater strength and hardness. Its properties can be increased by adding aluminum and titanium to the nickel-copper base, and by heating under controlled conditions so that submicroscopic particles of Ni3 are precipitated throughout the source. In some environments it has provides greater tendency toward stress-corrosion cracking. It has been found to be resistant to a sour-gas environment. Do you know Monel Rivets is a permanent mechanical fastener? Before being installed, it consists of a smooth cylindrical shaft with a head on one end. The opposite end to the head is called the tail. On installation, it is placed in a punched or drilled hole, and the tail is upset, or bucked, its head is supported against the direction of the tail when upsetting so it will stay on place, the tail expands to about 1.5 times the original shaft diameter for holding the rivet in place.
Monel Fasteners
Monel Nuts
Monel Bolts
Monel Hex Bolts
Monel Rivets
Monel Screws
Monel Fasteners manufacturer in India, in-house manufacturing capabilities to produce Nickel Alloy K500 Hex Nuts, Blind Rivets, Threaded Rod, Studs, and Heavy Hex Bolts in Mumbai factory
Table of contents
Monel Bolts Specifications
Manufacturer and supplier of Monel Screws and Alloy K500 Stud Bolt in UNF/ UNC / UNJC / UNJF and Extra Fine UNEF threads
| Monel Fasteners Sizes |
Manufacturing M2, M3, M3.5, M4, M5, M6, M8, M10, M12, M14, M16, M18, M20, M22, M24, M27, M30, M33, M36, M42, M45, M48 to M160 and Custom Metric Monel Bolts |
| Din 2.4375 Monel Metal Bolts Size Metric |
|
| Monel Hex Bolts Size Inch |
|
| Monel bolt head markings |
|
| Standard | Manufacturer of Monel Bolts as per IS, ANSI, ASTM, DIN, ISO, JIS, GB, ASME, BS, UNI, CSN, EU, IFI, PN, and all International Standards
|
| Monel Bolts Length | 3 mm to 200 mm |
| Alloy K500 Bolts & Screws US Threads | Unified national fine (UNF), Unified national extra fine (UNEF), UNJC and UNJF threads, METRIC, BSW, BSF, Unified national coarse (UNC), UNK threads, UNR threads, Constant-pitch threads |
| Monel Bolts UTS - Unified Thread Standard | UNC, UNF, NPT, UNS, UNEF, NPTF |
| Monel Bolts Head drive | Phillips/Slot, Phillips, Slotted, Six-Lobe, etc |
| Material Origin | Monel Bolts are Western European. Eastern origin possible on request. |
| Monel Nut Bolt Surface Finish & Coating |
All Din 2.4375 Monel Metal Fasteners surface finishes can be supplied including Galvanised, Zinc, Sherardized, Dacromet, Electroless Nickel, Geomet & PTFE. |
| Other Monel Bolts manufacturers | Omni, APL, Kundan, Deepak Fasteners, Unbrako, Sundaram Precision, Infasco, Caparo, EBY Fastener, SPAX® Screws, GKW Etc. |
| ISO - International Organization for Standardization | |
| Monel UNS 5500 Fasteners types | Stud Bolts, Foundation Bolts, T-Head Bolts, Socket Hexagon Head Screw, Spring Washers, Wing Screw, Hexagon Nut, Sockets, Hex Domed Cap Nuts, Eye Bolt, Wing Screw, Allen Cap screw, Socket Head Cap Screw, U Bolts, Structural Bolts, Anchor Bolt, Bolts, Screw, J Bolts, Nuts, Cap Screw, Studs, Studs, Screws, Mushroom Head Square Neck Bolts, Hex Head Bolts, Socket Screw, Hex Coupling Nut, Pan Head Screw, Marine Anchors, Nut, Washers, Anchors, Hex Set Screw, Square Nut, Hex Nut, Machine Screw |
| Why Jignesh Steel? |
|
| MOQ | 5 pieces |
| Preferred Monel Nut Bolt Drawing Formats | JPEG, PDF, CAD, STP, IGS |
| Ask for Test Certificates from Monel Bolts manufacturers |
|
| Free Samples | Yes |
| Delivery time | Regular product is about 7-15 days |
| Payment Terms | T/T, Western Union, Paypal, L/C or Trade Assurance 30% deposit & balance before shipping |
| Port of Dispatch | Mumbai or Kalamboli ports in Maharashtra state of India |
| Alloy K500 Fasteners Application and Uses | Industrial, Wind tower, Railway, Nuclear power, Construction, Electronic, and Automotive industry |
Monel Hex Bolts Dimensions
Monel Nuts, Din 2.4375 Socket Head Cap Screws and Alloy K500 Flange Bolts suitable for high stresses, check Monel Rivets and Hex Bolt dimensions, grade and thread chart
| HEX BOLT METRIC SIZE (D) | DIAMETER | BOLT HEAD THICKNESS | ACROSS THE FLATS | ACROSS CORNERS | ||||
|---|---|---|---|---|---|---|---|---|
| D (MAX) | D (MIN) | H (MAX) | H (MIN) | F (MAX) | F (MIN) | C (MAX) | C (MIN) | |
| m10 | 10.00 | 9.78 | 6.63 | 6.17 | 17.00 | 15.73 | 18.48 | 17.77 |
| m12 | 12.00 | 11.73 | 7.76 | 4.24 | 19.00 | 17.73 | 20.78 | 20.03 |
| m14 | 14.00 | 13.73 | 9.09 | 8.51 | 22.00 | 20.67 | 24.25 | 23.35 |
| m16 | 16.00 | 15.73 | 10.32 | 9.68 | 24.00 | 23.67 | 27.71 | 26.75 |
| m20 | 20.00 | 19.67 | 12.88 | 12.12 | 30.00 | 29.16 | 34.64 | 32.95 |
| m24 | 24.00 | 23.67 | 15.44 | 14.56 | 36.00 | 35.00 | 41.57 | 39.55 |
| m30 | 30.00 | 29.67 | 19.48 | 17.92 | 46.00 | 45.00 | 53.12 | 50.85 |
| m36 | 36.00 | 35.61 | 23.38 | 21.63 | 55.00 | 53.80 | 63.51 | 60.79 |
| m42 | 42.00 | 41.38 | 26.97 | 25.03 | 65.00 | 62.90 | 75.06 | 71.71 |
| m48 | 48.00 | 47.38 | 31.07 | 28.93 | 75.00 | 72.60 | 86.60 | 82.76 |
| m56 | 56.00 | 55.26 | 36.2 | 33.80 | 85.00 | 82.20 | 98.15 | 93.71 |
| m64 | 64.00 | 63.26 | 41.32 | 38.68 | 95.00 | 91.80 | 109.70 | 104.65 |
| m72 | 72.00 | 71.26 | 46.45 | 43.55 | 105.00 | 101.40 | 121.24 | 115.60 |
| m80 | 80.00 | 79.26 | 51.58 | 48.42 | 115.00 | 111.00 | 132.72 | 126.54 |
| m90 | 90.00 | 89.13 | 57.74 | 54.26 | 130.00 | 125.50 | 150.11 | 143.07 |
| m100 | 90.00 | 99.13 | 63.9 | 60.10 | 145.00 | 140.00 | 167.43 | 159.60 |
Din 2.4375 Monel Metal Hex Nuts Dimensions
Best price of M3 M4 M5 Metric Monel Flat Washers, ASTM F467 UNS 5500 Hex Head Bolt, and Nickel Alloy K500 Allen Bolts ex Mumbai, extensive size range
ASME B18.2.2 Monel UNS 5500 Hex Nuts and Hex Jam Nuts
| Dimensions | Nominal (Major) Diameter [in] |
Width Across Flats | Thickness | ||
|---|---|---|---|---|---|
| Minimum [in] | Maximum [in] | Minimum [in] | Maximum [in] | ||
| 1/4" | 0.2500 | 0.428 | 0.438 | 0.212 | 0.226 |
| 5/16" | 0.3125 | 0.489 | 0.500 | 0.258 | 0.273 |
| 3/8" | 0.3750 | 0.551 | 0.563 | 0.320 | 0.337 |
| 7/16" | 0.4375 | 0.675 | 0.688 | 0.365 | 0.385 |
| 1/2" | 0.5000 | 0.736 | 0.750 | 0.427 | 0.448 |
| 9/16" | 0.5625 | 0.861 | 0.875 | 0.473 | 0.496 |
| 5/8" | 0.6250 | 0.922 | 0.938 | 0.535 | 0.559 |
| 3/4" | 0.7500 | 1.088 | 1.125 | 0.617 | 0.665 |
| 7/8" | 0.8750 | 1.269 | 1.312 | 0.724 | 0.776 |
| 1" | 1.0000 | 1.450 | 1.500 | 0.831 | 0.887 |
| 1-1/8" | 1.1250 | 1.631 | 1.688 | 0.939 | 0.999 |
| 1-1/4" | 1.2500 | 1.812 | 1.875 | 1.030 | 1.094 |
| 1-3/8" | 1.3750 | 1.994 | 2.062 | 1.138 | 1.206 |
| 1-1/2" | 1.5000 | 2.175 | 2.250 | 1.245 | 1.317 |
| 1-5/8" | 1.6250 | 2.350 | 2.430 | 1.364 | 1.416 |
| 1-3/4" | 1.7500 | 2.538 | 2.625 | 1.460 | 1.540 |
| 1-7/8" | 1.8750 | 2.722 | 2.813 | 1.567 | 1.651 |
| 2" | 2.0000 | 2.900 | 3.000 | 1.675 | 1.763 |
Monel UNS 5500 Flat Washer Dimensions
Searching for Monel Fasteners suppliers? Manufacturing full range of ASTM F467 Nut Bolts, Screws, Washer, MS20426 Rivet Nut and custom Fasteners in India, ask for a free sample and quote
ISO 7089 Monel Flat Washer dimensions in mm
| For Screw Nominal Size |
Hole Diameter | Outside Diameter | Flat Washer Thickness |
|---|---|---|---|
| M1.6 | 1.7 | 4 | 0.3 |
| M2 | 2.2 | 5 | 0.3 |
| M2.5 | 2.7 | 6 | 0.5 |
| M2.6 | 2.8 | 7 | 0.5 |
| M3 | 3.2 | 7 | 0.5 |
| M3.5 | 3.7 | 8 | 0.5 |
| M4 | 4.3 | 9 | 0.8 |
| M5 | 5.3 | 10 | 1 |
| M6 | 6.4 | 12 | 1.6 |
| M7 | 7.4 | 14 | 1.6 |
| M8 | 8.4 | 16 | 1.6 |
| M10 | 10.5 | 20 | 2 |
| M12 | 13 | 24 | 2.5 |
| M14 | 15 | 28 | 2.5 |
| M16 | 17 | 30 | 3 |
| M18 | 19 | 34 | 3 |
| M20 | 21 | 37 | 3 |
| M22 | 23 | 39 | 3 |
| M24 | 25 | 44 | 4 |
| M27 | 28 | 50 | 4 |
| M30 | 31 | 56 | 4 |
| M33 | 34 | 60 | 5 |
| M36 | 37 | 66 | 5 |
| M39 | 40 | 72 | 6 |
| M42 | 43 | 78 | 7 |
| M45 | 46 | 85 | 7 |
| M48 | 50 | 92 | 8 |
| M52 | 54 | 98 | 8 |
| M56 | 58 | 105 | 9 |
Alloy K500 Socket Head Cap Screw Dimensions
| Metric Screw Dimensions | Body Diameter | Hex Key Size | Head Height | Head Diameter | Max. Thread Length | Min. Thread Length |
|---|---|---|---|---|---|---|
| M2 x 0.4 | 2.00 | 1.5 | 2.00 | 3.80 | 12 | 4 |
| M2.5 x 0.45 | 2.50 | 2.0 | 2.36 | 4.32 | 12 | 5 |
| M3 x 0.5 | 2.50 | 2.5 | 3.00 | 5.50 | 35 | 5 |
| M4 x 0.7 | 4.00 | 3.0 | 4.00 | 7.00 | 50 | 6 |
| M5 x 0.8 | 5.00 | 4.0 | 5.00 | 8.50 | 70 | 6 |
| M6 x 1.0 | 6.00 | 5.0 | 6.00 | 10.00 | 110 | 8 |
| M8 x 1.25 | 8.00 | 6.0 | 8.00 | 13.00 | 150 | 10 |
| M10 x 1.5 | 10.00 | 8.0 | 10.00 | 16.00 | 150 | 10 |
| M12 x 1.75 | 12.00 | 10.0 | 12.00 | 18.00 | 150 | 12 |
| M16 x 2.0 | 16.00 | 14.0 | 16.00 | 24.00 | 180 | 25 |
| M20 x 2.5 | 20.00 | 17.0 | 20.00 | 30.00 | 200 | 30 |
| M24 x 3.0 | 24.00 | 19.0 | 24.00 | 36.00 | 260 | 40 |
| M30 x 3.5 | 30.00 | 22.0 | 30.00 | 45.00 | 300 | 80 |
| M36 x 4.0 | 36.00 | 27.0 | 26.00 | 54.00 | 260 | 80 |
Monel Bolts Type
Monel Flange Bolts
Din 2.4375 Monel Metal Hex Bolts
Monel UNS 5500 Square Bolts
Alloy K500 Heavy Hex Bolts
Monel K500 U Bolts
UNS N05500 Eye Bolts
Alloy K500 Anchor Bolts
Monel Lag Bolts
Monel K500 Allen Cap Bolt
Din 2.4375 Monel Metal Hex Head Bolts
Monel UNS 5500 Carriage Bolts
UNS N05500 Countersunk Bolts
Monel Nuts Types
Monel K500 Lock Nuts
Monel UNS 5500 T-Nuts For Wood
Monel Eye Nuts
UNS N05500 Panel Nuts
Din 2.4375 Monel Metal Square Nuts
Alloy K500 Heavy Hex Nuts
Monel UNS 5500 Jam Nuts
Din 2.4375 Monel Metal Hex Nuts
Alloy K500 Wheel Nuts and Caps
Monel K500 Wing Nuts
UNS N05500 Cage Nuts and Spring Nuts
Nickel Alloy K500 Self Locking Nuts
Types of Monel Rivets
Monel Pop Rivets
Monel Blind Rivets
MS20426 Rivet Nut
MS20470 Rivnut
Bucking Monel Rivets
Monel Rivets Aircraft
Monel Screws Types
ASTM F467 Monel Alloy Tek Screws
Nickel Alloy K500 Deck Screws
ASTM F467 Monel Alloy Concrete Screws
Monel Socket Head Cap Screw
Monel Eye Screw
Din 2.4375 Monel Metal Wood Screw
Monel UNS 5500 Coach Screw
Alloy K500 Thumb Screw
UNS N05500 12-Point Flange Head Cap Screws
Monel K500 Hex Head Lag Screw
Din 2.4375 Monel Metal Wing Screw
Alloy K500 Hex Cap Screw
Monel K500 Allen Cap Screw
Monel UNS 5500 Captive Panel Screws
UNS N05500 Grub Screw
Nickel Alloy K500 Fully Threaded Screw
ASTM F467 Monel Alloy Torx Screw
Nickel Alloy K500 Pan Head Screw
ASTM F467 Monel Alloy Truss Head Screw
Monel Flat Head Screw
Monel Washers Types
Monel Cup Washer
Alloy K500 Square Washer
Din 2.4375 Monel Metal Lock Washer
Monel UNS 5500 Countersunk Washer
Monel K500 Belleville Washer
UNS N05500 Shim Washer
Din 2.4375 Monel Metal Square Plate Washer
Monel UNS 5500 Square Washer
Alloy K500 Penny Washer
Monel Flat Washers
Polished UNS N05500 Washer
Nickel Alloy K500 Ring Washers
Monel Fasteners Application
- Aviation & Aircraft industry
- Automobiles
- Monel Stud Bolt for Construction
- Defence & Nuclear Energy Sector
- Sea Water, Offshore & Chemical Industry
- Electrical & Agriculture Industry
- Heavy duty Monel Fasteners for Heat Exchangers
- Engineering & Aerospace Industry
- Large size Monel Bolts for Oil & Gas Industries
- High quality Monel Petrochemical Fasteners
- High Strength Monel Bolts and Nuts for Automotive industry
- Metric Monel Hex Bolts for Power Generation
- Monel Nut Bolt suitable for Off-Shore Oil Drilling
Monel Bolts Testing Tool & Equipment
- Shear test for Monel Rivets
- Tensile Test
- Coordinate Measuring Machine
- Image measuring instrument
- Routine inspection of calipers
- Roughness tester used to test the surface finish of a Monel Bolts and Nuts
- Micrometer for accurate measurement of Monel Bolts
- Thread gauge and Smooth plug gauge used to check Monel Screws and Nuts quickly
Din 2.4375 Monel Metal Nuts Sizes
ASME B18.2.2 Alloy K500 Square and Hex Machine Screw Nuts dimensions
| Monel Hex Nuts Sizes | Nominal Dia [in] |
Width Across Flats | Nut Thickness | ||
|---|---|---|---|---|---|
| Nominal [in] | Min [in] | Min [in] | Max [in] | ||
| #0 | 0.060 | 5/32"(0.156) | 0.150 | 0.043 | 0.050 |
| #2 | 0.086 | 3/16"(0.188) | 0.180 | 0.057 | 0.066 |
| #4 | 0.112 | 1/4"(0.250) | 0.241 | 0.087 | 0.098 |
| #6 | 0.138 | 5/16"(0.312) | 0.302 | 0.102 | 0.114 |
| #8 | 0.164 | 11/32"(0.344) | 0.332 | 0.117 | 0.130 |
| #10 | 0.190 | 3/8"(0.375) | 0.362 | 0.117 | 0.130 |
| 1/4" | 0.250 | 7/16"(0.438) | 0.423 | 0.178 | 0.193 |
| 5/16" | 0.312 | 9/16"(0.562) | 0.545 | 0.208 | 0.225 |
| 3/8" | 0.375 | 5/8"(0.625) | 0.607 | 0.239 | 0.257 |
Monel UNS 5500 Screws Sizes
| Alloy K500 Screw Size | Body Dia | Hex Key Size | Head Height | Head Dia | Maximum Thread Length | Minimum Thread Length |
|---|---|---|---|---|---|---|
| No. 0 | 0.06 | 0.05 | 0.06 | 0.096 | 5/8 | 3/8 |
| No. 1 | 0.073 | 1/16 | 0.073 | 0.118 | 7/8 | 3/8 |
| No. 2 | 0.086 | 5/64 | 0.086 | 0.14 | 7/8 | 1/2 |
| No. 3 | 0.099 | 5/64 | 0.099 | 0.161 | 7/8 | 1/2 |
| No. 4 | 0.112 | 3/32 | 0.112 | 0.183 | 11/8 | 11/16 |
| No. 5 | 0.125 | 3/32 | 0.125 | 0.205 | 1 | 11/16 |
| No. 6 | 0.138 | 7/64 | 0.138 | 0.226 | 11/8 | 11/16 |
| No. 8 | 0.164 | 9/64 | 0.164 | 0.27 | 11/4 | 3/4 |
| No. 10 | 0.19 | 5/32 | 0.19 | 0.312 | 13/8 | 15/16 |
| No. 12 | 0.216 | 5/32 | 0.216 | 0.345 | 11/4 | 15/16 |
| 1/4 | 0.250 | 3/16 | 1/4 | 3/8 | 11/2 | 15/16 |
| 5/16 | 0.3125 | 1/4 | 5/16 | 15/32 | 1-3/4 | 1-1/16 |
| 3/8 | 0.375 | 5/16 | 3/8 | 9/16 | 2 | 1-3/16 |
| 7/16 | 0.438 | 3/8 | 7/16 | 21/32 | 2-1/4 | 13/16 |
| 1/2 | 0.500 | 3/8 | 1/2 | 3/4 | 2-1/2 | 1-3/8 |
| 9/16 | 0.5625 | 7/16 | 9/16 | 27/32 | 2-7/16 | 1-5/8 |
| 5/8 | 0.625 | 1/2 | 5/8 | 15/16 | 3 | 1-5/8 |
| 3/4 | 0.750 | 5/8 | 3/4 | 11/8 | 3-1/2 | 1-7/8 |
| 7/8 | 0.875 | 3/4 | 7/8 | 15/16 | 3-3/4 | 2-1/16 |
| 1 | 1.000 | 3/4 | 1 | 11/2 | 4-1/2 | 2-1/4 |
| 1-1/8 | 1.125 | 7/8 | 1-1/8 | 111/16 | 4-21/32 | 2-13/16 |
| 1-1/4 | 1.250 | 7/8 | 1-1/4 | 17/8 | 5-3/32 | 3-1/8 |
| 1-1/2 | 1.500 | 1 | 1-1/2 | 21/4 | 6-5/64 | 3-3/4 |
| 1-3/4 | 1.750 | 11/4 | 1-3/4 | 25/8 | 7-1/8 | 4-3/8 |
| 2 | 2.000 | 11/2 | 2 | 3 | 8-7/64 | 5 |
Alloy K500 Washer Sizes
| Washer Size | Basic Diameter [in] | Series | Inner Dia, Basic [in] |
Outer Dia, Basic [in] |
Washer Thickness, Basic [in] |
|---|---|---|---|---|---|
| #0 | 0.0600 | - | 0.078 | 0.188 | 0.020 |
| #2 | 0.0860 | - | 0.094 | 0.250 | 0.020 |
| #4 | 0.1120 | - | 0.125 | 0.312 | 0.032 |
| #6 | 0.1380 | - | 0.156 | 0.375 | 0.049 |
| #8 | 0.1640 | - | 0.188 | 0.438 | 0.049 |
| #10 | 0.1900 | - | 0.219 | 0.500 | 0.049 |
| 1/4" | 0.2500 | Narrow | 0.281 | 0.625 | 0.065 |
| 1/4" | 0.2500 | Wide | 0.312 | 0.734 | 0.065 |
| 5/16" | 0.3125 | Narrow | 0.344 | 0.688 | 0.065 |
| 5/16" | 0.3125 | Wide | 0.375 | 0.875 | 0.083 |
| 3/8" | 0.3750 | Narrow | 0.406 | 0.812 | 0.065 |
| 3/8" | 0.3750 | Wide | 0.438 | 1.000 | 0.083 |
| 7/16" | 0.4375 | Narrow | 0.469 | 0.922 | 0.065 |
| 7/16" | 0.4375 | Wide | 0.500 | 1.250 | 0.083 |
| 1/2" | 0.5000 | Narrow | 0.531 | 1.062 | 0.095 |
| 1/2" | 0.5000 | Wide | 0.562 | 1.375 | 0.109 |
| 9/16" | 0.5625 | Narrow | 0.594 | 1.156 | 0.095 |
| 9/16" | 0.5625 | Wide | 0.625 | 1.469 | 0.109 |
| 5/8" | 0.6250 | Narrow | 0.656 | 1.312 | 0.095 |
| 5/8" | 0.6250 | Wide | 0.688 | 1.750 | 0.134 |
| 3/4" | 0.7500 | Narrow | 0.812 | 1.469 | 0.134 |
| 3/4" | 0.7500 | Wide | 0.812 | 2.000 | 0.148 |
| 7/8" | 0.8750 | Narrow | 0.938 | 1.750 | 0.134 |
| 7/8" | 0.8750 | Wide | 0.938 | 2.250 | 0.165 |
| 1" | 1.0000 | Narrow | 1.062 | 2.000 | 0.134 |
| 1" | 1.0000 | Wide | 1.062 | 2.500 | 0.165 |
| 1-1/8" | 1.1250 | Narrow | 1.250 | 2.250 | 0.134 |
| 1-1/8" | 1.1250 | Wide | 1.250 | 2.750 | 0.165 |
| 1-1/4" | 1.2500 | Narrow | 1.375 | 2.500 | 0.165 |
| 1-1/4" | 1.2500 | Wide | 1.375 | 3.000 | 0.165 |
| 1-3/8" | 1.3750 | Narrow | 1.500 | 2.750 | 0.165 |
| 1-3/8" | 1.3750 | Wide | 1.500 | 3.250 | 0.180 |
| 1-1/2" | 1.5000 | Narrow | 1.625 | 3.000 | 0.165 |
| 1-1/2" | 1.5000 | Wide | 1.625 | 3.500 | 0.180 |
| 1-5/8" | 1.6250 | - | 1.750 | 3.750 | 0.180 |
| 1-3/4" | 1.7500 | - | 1.875 | 4.000 | 0.180 |
| 1-7/8" | 1.8750 | - | 2.000 | 4.250 | 0.180 |
| 2" | 2.0000 | - | 2.125 | 4.500 | 0.180 |
Monel K500 Bolts Sizes
ASME B18.2.1 UNS N05500 Hex, Heavy Hex, Square, Hex Flange, Lobed Head, Askew Head Bolts, and Lag Screws (Inch Series)
| Nickel Alloy K500 Bolt Nominal Size (in) |
Outside Dia (in) | Width Across Flats (in) |
|
|---|---|---|---|
| max | min | ||
| 5/16 | 0.324 | 0.298 | 1/2 |
| 3/8 | 0.388 | 0.360 | 9/16 |
| 7/16 | 0.452 | 0.421 | 5/8 |
| 1/2 | 0.515 | 0.482 | 3/4 |
| 5/8 | 0.642 | 0.605 | 15/16 |
| 3/4 | 0.768 | 0.729 | 1 1/8 |
| 7/8 | 0.895 | 0.852 | 1 5/16 |
| 1 | 1.022 | 0.976 | 1 1/2 |
| 1 1/8 | 1.149 | 1.098 | 1 11/16 |
| 1 1/4 | 1.277 | 1.223 | 1 7/8 |
| 1 3/8 | 1.404 | 1.345 | 2 1/16 |
| 1 1/2 | 1.531 | 1.470 | 2 1/4 |
| 1 5/8 | 1.658 | 1.591 | 2 7/16 |
| 1 3/4 | 1.785 | 1.716 | 2 5/8 |
| 1 7/8 | 1.912 | 1.839 | 2 13/16 |
| 2 | 2.039 | 1.964 | 3 |
| 2 1/4 | 2.305 | 2.214 | 3 3/8 |
| 2 1/2 | 2.559 | 2.461 | 3 3/4 |
| 2 3/4 | 2.827 | 2.711 | 4 1/8 |
| 3 | 3.081 | 2.961 | 4 1/2 |
| 3 1/4 | 3.335 | 3.210 | 4 7/8 |
| 3 1/2 | 3.589 | 3.461 | 5 1/4 |
| 3 3/4 | 3.858 | 3.726 | 5 5/8 |
| 4 | 4.111 | 3.975 | 6 |
Chemical Composition of Monel Hex Bolts
| Monel K500 Bolts | |
| Element | Content (%) |
| Nickel, Ni | 63.0-70.0 |
| Silicon, Si | .50 max |
| Carbon, C | .25 max |
| Sulphur, S | .01 max |
| Copper, Cu | - |
| Iron, Fe | 2.0 max |
| Manganese, Mn | 1.5 max |
Mechanical Properties of Din 2.4375 Monel Bolts
| Monel K500 fasteners | ||
|---|---|---|
| Properties | Metric Bolts | Imperial Bolts |
| Tensile strength(annealed) | 517-620 MPa | 75-90 ksi |
| Yield strength | 172-345 MPa | 25-50 ksi |
| Modulus of elasticity | 179 GPa | 26000 ksi |
| Poisson’s ratio | 0.32 | 0.32 |
Monel UNS 5500 Fasteners Equivalent Grade
| Monel Alloy | Common Name | International Specification | |||
|---|---|---|---|---|---|
| British | European | ASTM | UNS | ||
| Alloy K500 | Monel K500 ® Bolts | BS 3076 NA18 | 2.4375 | B865-04 | N05500 |
Monel Bolts Price List
| Products | FOB Price US $ |
|---|---|
| Monel alloy bolts and nuts | US $10.00-$15.00/ Kilogram |
| Monel K500 Stud Bolt And Nut | US $0.25/ Piece |
| Monel K500 hex flange bolt and nut fasteners | US $0.50-$1.00/ Piece |
| ISO 15979 Fabric Metal Auto Fastener Diameter 8MM Solid Monel Rivets | US $0.01-$0.05/ Piece |
| Monel Alloy heavy hex bolts with nuts and washers | US $0.30-$0.50/ Piece |
| Blind monel aircraft pop rivets | US $1,000.00/ Carton |
| Standard sizes ISO8677 Monel cup head carriage bolt and nuts set | US $0.17-$0.20/ Piece |
| Monel hexagon socket screw | US $0.80-$1.30/ Piece |
| Precision cnc machining monel K500 special screw fasteners for submarine | US $3.00-$7.00/ Piece |
| Monel K500 Bolts Nut UNS N0550 | US $0.10-$5.00/ Piece |
| Countersunk Head Monel Blind Rivet | US $22.00/ Piece |
| Monel K-500 Hex Bolt | US $2.00-$20.00/ Set |
Call us or send us an email to sales@jigneshsteel.com for more details. Always compare our price with other Monel Bolts manufacturers in India or China
- Nickel Alloy Fasteners
- Stainless Steel Bolts
- Stainless Steel Nut
- Stainless Steel Screw
- Stainless Steel Washer
- 17-4 PH Stainless Steel Bolts
- A286 Stainless Steel Fasteners
- Duplex 2205 Bolts
- Super Duplex Bolts
- Titanium Bolts
- Silicon Bronze Bolts
- Copper Bolts
- High Tensile Fasteners
- Carbon Steel Bolts
- Alloy Steel Bolts
- Aluminum Fasteners
- Phosphor Bronze Fasteners
- Phosphor Bronze Washers
- Aluminium Bronze Fasteners
- Copper Nickel Fasteners
- Mp35n Bolts
- PTFE Coated Bolts
- Types of Fasteners
- Fastener Standards
- Nut Bolt Weight Calculator
- Stud weight calculator
