• +(91) 022-6659 5844
  • sales@jigneshsteel.com
Jignesh Steel
RFQ

Grade 2 Titanium Fasteners

  • Home
  • Grade 2 Titanium Fasteners

ASTM B348 Grade 2 Hex Bolts and Ti Cp Grade 2 Threaded Rod

B348 Grade 2 are defined as hardware that can be easily installed and removed with hand or power tools. In general term it is something which is used as a restraint for holding things together or attaching to other things. Common fasteners are bolts, screws, nuts and rivets. ASTM B348 Grade 2 is commercially pure titanium. It provides an outstanding corrosion resistance and useful strength at low density. It has good weldability and it can easily form. It is the most commonly used titanium grade. Most applications of this grade are in the chemical industries. The most common uses are reactor autoclaves, heat exchangers, condensers fittings, piping, and, valves. Grade 2 Titanium Fasteners is widely used in heat exchangers; where despite the low thermal conductivity of titanium the efficiency of heat transfer is high due to good strength, high resistance to erosion corrosion and the fouling resistance of the hard, smooth surface. ASTM B348 gr2 has excellent resistance to general corrosion, with low or negligible loss rates in many media. It can be forged by conventional processes within the narrow temperature range 815 – 900°C. It is generally are more difficult to forge compared to aluminium and alloy steels, due to the narrow temperature range, and high strain rate and temperature dependence of strength. It is readily machinable by conventional methods. It has low thermal conductivity and heat dissolution is poor, so generous use of agents is suggested. It can be readily weldable by GMAW and GTAW processes. Preheat or post weld heat treatment is not required.

Grade 2 Titanium Fasteners

Grade 2 Titanium Fasteners

Grade 2 Titanium Nuts

Grade 2 Titanium Nuts

Grade 2 Titanium Bolts

Grade 2 Titanium Bolts

Grade 2 Titanium Hex Bolts

Grade 2 Titanium Hex Bolts

Titanium Grade 2 Stud Bolts

Titanium Grade 2 Stud Bolts

Grade 2 Titanium Threaded Rod

Grade 2 Titanium Threaded Rod

Looking for Extra Fine UNEF threads Grade 2 Titanium Bolts manufacturers in India? Fully heat-treated ASTM F468 UNS R50400 Stud Bolt, Socket Head Cap Screws, Flange Bolts for heavy duty

Grade 2 Titanium Fasteners

Table of contents

Grade 2 Titanium Fasteners Specifications

Manufacturer and supplier of ASTM B348 gr2 Studs, Hex Nuts, Flat Washer and Titanium Grade 2 Fasteners suitable for high stresses

Grade 2 Titanium Fasteners Sizes
  • Cold Forming titanium fasteners: M2-M24 size
  • Hot Forging titanium bolts: M24-M100 metric size
Manufacturer of Titanium Grade 2 Bolts
  • Dia: M10 - M110
  • Length: 12 - 1200MM
  • or Custom sizes
Grade 2 Titanium Hex Bolts Size Inch
  • Dia: 1/2" - 4.0"
  • Length: 1/2" - 52"
Fasteners Standard

Manufacturer of Grade 2 Titanium Fasteners as per ANSI, ASTM, DIN, IS, JIS, GB, ASME, BS, EU, IFI, ISO, UNI, CSN, PN, and other Standards

  • International ISO
  • ANSI B 18.2.4 2M
  • Polish PN
  • British BS
  • GB/T5783, GB/T5782, GB5783
  • American ASME
  • Indian IS
  • German DIN
  • American SAE
  • ANSI - American National Standards Institute
  • Spanish CSN
  • ANSI B 28.2.4 1M
  • Italian UNI
  • European EU
Grade 2 Titanium Fasteners Length 3 mm to 200 mm
Titanium Gr 2 Bolts & Screws US Threads METRIC, BSW, BSF, Unified national coarse (UNC), Unified national fine (UNF), Unified national extra fine (UNEF), UNJC and UNJF threads, UNK threads, UNR threads, Constant-pitch threads
Grade 2 Titanium Fasteners UTS - Unified Thread Standard UNC, UNF, NPT, UNS, UNEF, NPTF
Grade 2 Titanium Bolts Head drive indented hex head, Pan, Phillips/ Slot, flat undercut, fillister head, Phillips, Slotted, Flat 82 degree, Round, Truss, flat head 100 degree, Oval, binding, Six-Lobe
Material Origin of Grade 2 Titanium Fasteners Western European. Eastern origin possible on request.
Grade 2 Titanium Fasteners Surface Finish & Coating
  • Ptfe Coated Grade 2 Titanium Bolts
  • Manganese Phosphate
  • Hot Dipped Galvanized
  • Self-Colour
  • Teflon
  • Zinc Phosphate (yellow, blue, white, black)
  • Anodizing
  • Zinc Electro Plating (Hexavalent or Trivalent Chrome)
  • ZAC (Zinc Alluminium Flake Coating)
  • Cadmium
  • Nickel plated
  • Xylon
  • Phosphate
  • Geometry
  • Dacroment
  • Black oxide
  • Plated zinc-nickel
  • Sherardized
  • Bright Zinc Plated (BZP)

 
ASTM F468 grade 2 Fasteners types Hexagon Nut, Studs, T-Head Bolts, Nut, Hex Nut, Hex Coupling Nut, Foundation Bolts, Allen Cap screw, Socket Head Cap Screw, Nuts, Hex Domed Cap Nuts, Machine Screw, Wing Screw, Anchor Bolt, Stud Bolts, Screws, Spring Washers, Wing Screw, Sockets, Square Nut, Structural Bolts, Hex Set Screw, Bolts, Socket Screw, Marine Anchors, Socket Hexagon Head Screw, Pan Head Screw, Cap Screw, Anchors, U Bolts, Washers, Screw, Mushroom Head Square Neck Bolts, Studs, Eye Bolt, Hex Head Bolts, J Bolts,
ISO - International Organization for Standardization
Ask for Test Certificates from Grade 2 Titanium Fasteners manufacturers
  • ISO 898-2
  • EN 14399-2
  • EN 10204 / 3.1 MTC
  • ISO 6508-1
  • ASTM F468 grade 2 Bolts with ISO 148-1
  • EN 14399-10
  • Titanium Grade 2 Bolts Tensile test to ISO 898-1
Why Jignesh Steel?
  • Best Price in India compared to Grade 2 Titanium Fasteners manufacturers in China
  • Manufacturing Titanium bolts since Year 2008
  • Wide International network
  • Provides Pre-production ASTM F468 UNS R50400 Fasteners sample

Grade 2 Titanium Hex Bolts Dimensions

Titanium Gr 2 Hex Head Bolt and ASTM F468 grade 2 Allen Bolts, Check Thread Pitch Chart, dimensions and price list ex Mumbai

Grade 2 Titanium Heavy Hex Bolts Dimensions

Titanium  Heavy Hex Bolt Diameter  D  F  C  H
 Body Diameter    Width Across Flats   Width Across Corners   Height
 Max  Basic   Max        Min         Max  Min  Basic  Max       Min      
1/2 0.515 7/8 0.875 0.850 1.010 0.969 11/32 0.364 0.302
5/8 0.642 1-1/16 1.062 1.031 1.227 1.175 27/64 0.444 0.378
3/4 0.768 1-1/4 1.250 1.212 1.443 1.383 1/2 0.524 0.455
7/8 0.895 1-7/16 1.438 1.394 1.660 1.589 37/64 0.604 0.531
1 1.022 1-5/8 1.625 1.575 1.876 1.796 43/64 0.700 0.591
1-1/8 1.149 1-13/16 1.812 1.756 2.093 2.002 3/4 0.780 0.658
1-1/4 1.277 2 2.00 1.938 2.309 2.209 27/32 0.876 0.749
1-3/8 1.404 2-3/16 2.188 2.119 2.526 2.416 29/32 0.940 0.810
1-1/2 1.531 2-3/8 2.375 2.300 2.742 2.622 1 1.036 0.902
1-3/4 1.785 2-3/4 2.750 2.662 3.175 3.035 1-5/32 1.196 1.054
2 2.039 3-1/8 3.125 3.025 3.608 3.449 1-11/32 1.388 1.175
2-1/4 2.305 3-1/2 3.500 3.388 4.041 3.862 1-1/2 1.548 1.327
2-1/2 2.559 3-7/8 3.875 3.750 4.474 4.275 1-21/32 1.708 1.479

Titanium Grade 2 Hex Nuts Dimensions

Manufacturing M2 M3 M4 M6 M10 M12 Titanium Cp Grade 2 Heavy Hex Bolts and Cp Ti Grade 2 Screws in Metric sizes

ASTM F468 grade 2 Heavy Hex Nut Dimensions in mm

ISO Grade 2 Titanium Hex Nut NB MAX Across Flats MIN Thickness Across Corners MAX Thickness MIN Across Flats
M 8 13 6.44 14.38 6.8 12.73
M 10 16 8.04 17.77 8.4 15.73
M 12 18 10.37 20.03 10.8 17.73
M 14 21 12.1 23.35 12.8 20.67
M 16 24 14.1 26.75 14.8 23.67
M 18 27 15.1 29.56 15.8 26.16
M 20 30 16.9 32.95 18 29.16
M 22 34 18.1 37.29 19.4 33
M 24 36 20.2 39.55 21.5 35
M 27 41 22.5 45.2 23.8 40
M 30 46 24.3 50.85 26.6 45
M 33 50 27.4 55.37 28.7 49
M 36 55 29.4 60.79 31 53.8
M 39 60 31.8 66.44 33.4 58.8
M 42 65 32.4 71.3 34 63.1
M 45 70 34.4 76.95 36 68.1
M 48 75 39.4 82.6 38 73.1
M 52 80 40.4 88.25 42 78.1
M 56 85 43.4 93.56 45 82.8
M 60 90 46.4 99.21 48 87.8
M 64 95 49.1 104.86 51 92.8
M 68 100 52.1 110.51 54 97.8
M 72 x 6 105 56.1 116.16 58 102.8
M 76 x 6 110 59.1 121.81 61 107.8
M 80 x 6 115 62.1 127.46 64 112.8

ASTM F468 grade 2 Flat Washer Dimensions

ISO 7089 Grade 2 Titanium Flat Washer dimensions in mm

ASTM F468 grade 2 Flat Washer Dimensions

Titanium Grade 2 Bolt Size USS titanium washers SAE washers
OD (in.) ID (in.) Thickness OD (in.) ID (in.) Thickness
1/8 (#6) - - - 0.375 0.156 .036/.065
5/32 (#8) - - - 0.438 0.188 .036/.065
3/16 (#10) 0.560 0.250 .036/.065 0.500 0.220 .036/.065
7/32 (#12) - - - 0.562 0.250 .051/.080
1/4 (#14) 0.734 0.312 .051/.080 0.625 0.281 .051/.080
5/16 0.875 0.375 .064/.104 0.688 0.344 .051/.080
3/8 1.000 0.438 .064/.104 0.812 0.406 .051/.080
7/16 1.250 0.500 .064/.104 0.922 0.469 .051/.080
1/2 1.375 0.562 .086/.132 1.062 0.531 .074/.121
9/16 1.469 0.625 .086/.132 1.156 0.594 .074/.121
5/8 1.750 0.688 .108/.160 1.312 0.656 .074/.121
3/4 2.000 0.812 .122/.177 1.469 0.812 .108/.160
7/8 2.250 0.938 .136/.192 1.750 0.938 .108/.160
1 2.500 1.062 .136/.192 2.000 1.062 .108/.160
1 1/8 2.750 1.250 .136/.192 2.250 1.250 .108/.160
1 1/4 3.000 1.375 .136/.192 2.500 1.375 .136/.192
1 3/8 3.250 1.500 .153/.213 2.750 1.500 .136/.213
1 1/2 3.500 1.625 .153/.213 3.000 1.625 .153/.213
1 5/8 3.750 1.750 .153/.213 - - -
1 3/4 4.000 1.875 .153/.213 - - -
1 7/8 4.250 2.000 .153/.213 - - -
2 4.500 2.125 .153/.213 - - -
2 1/4 4.750 2.375 .193/.248 - - -
2 1/2 5.000 2.625 .210/.280 - - -
2 3/4 5.250 2.875 .228/.310 - - -
3 5.500 3.125 .249/.327 - - -

Titanium Gr 2 Socket Head Cap Screw Dimensions

American National Standard ANSI/ASME B18.3.1M Grade 2 Titanium Socket Head Cap Screws

Titanium Gr 2 Socket Head Cap Screw Dimensions

Titanium Grade 2 Screw Nom. Size Thread Pitch Head
Height
H		 Body
Diameter
D		 Head
Diameter
A		 Hexagon
Socket
Size
J		 Chamfer
or
Radius
S		 Transition
Dia.
B		 Spline
Socket
Sizea
M		 Key
Engagement
T
Max Min Max Min Max Min Nom. Max Max Nom. Min
M1.6 × 0.35 1.60 1.52 1.60 1.46 3.00 2.87 1.5 0.16 2.0 1.829 0.80
M2 × 0.4 2.00 1.91 2.00 1.86 3.80 3.65 1.5 0.20 2.6 1.829 1.00
M2.5 × 0.45 2.50 2.40 2.50 2.36 4.50 4.33 2.0 0.25 3.1 2.438 1.25
M3 × 0.5 3.00 2.89 3.00 2.86 5.50 5.32 2.5 0.30 3.6 2.819 1.50
M4 × 0.7 4.00 3.88 4.00 3.82 7.00 6.80 3.0 0.40 4.7 3.378 2.00
M5 × 0.8 5.00 4.86 5.00 4.82 8.50 8.27 4.0 0.50 5.7 4.648 2.50
M6 × 1 6.00 5.85 6.00 5.82 10.00 9.74 5.0 0.60 6.8 5.486 3.00
M8 × 1.25 8.00 7.83 8.00 7.78 13.00 12.70 6.0 0.80 9.2 7.391 4.00
M10 × 1.5 10.00 9.81 10.00 9.78 16.00 15.67 8.0 1.00 11.2 … 5.00
M12 × 1.75 12.00 11.79 12.00 11.73 18.00 17.63 10.0 1.20 14.2 … 6.00
M14 × 2b 14.00 13.77 14.00 13.73 21.00 20.60 12.0 1.40 16.2 … 7.00
M16 × 2 16.00 15.76 16.00 15.73 24.00 23.58 14.0 1.60 18.2 … 8.00
M20 × 2.5 20.00 19.73 20.00 19.67 30.00 29.53 17.0 2.00 22.4 … 10.00
M24 × 3 24.00 23.70 24.00 23.67 36.00 35.48 19.0 2.40 26.4 … 12.00
M30 × 3.5 30.00 29.67 30.00 29.67 45.00 44.42 22.0 3.00 33.4 … 15.00
M36 × 4 36.00 35.64 36.00 35.61 54.00 53.37 27.0 3.60 39.4 … 18.00
M42 × 4.5 42.00 41.61 42.00 41.61 63.00 62.31 32.0 4.20 45.6 … 21.00
M48 × 5 48.00 47.58 48.00 47.61 72.00 71.27 36.0 4.80 52.6 … 24.00

Grade 2 Titanium Bolts Type

Grade 2 Titanium Flange Bolts

Grade 2 Titanium Flange Bolts

ASTM F468 grade 2 Square Bolts

ASTM F468 grade 2 Square Bolts

Titanium Gr 2 Heavy Hex Bolts

Titanium Gr 2 Heavy Hex Bolts

Titanium Grade 2 Hex Bolts

Titanium Grade 2 Hex Bolts

ASTM F468 UNS R50400 U Bolts

ASTM F468 UNS R50400 U Bolts

Titanium Gr 2 Anchor Bolts

Titanium Gr 2 Anchor Bolts

Titanium Cp Grade 2 Eye Bolts

Titanium Cp Grade 2 Eye Bolts

Titanium Grade 2 Hex Head Bolts

Titanium Grade 2 Hex Head Bolts

Grade 2 Titanium Lag Bolts

Grade 2 Titanium Lag Bolts

ASTM F468 grade 2 Carriage Bolts

ASTM F468 grade 2 Carriage Bolts

ASTM F468 UNS R50400 Allen Cap Bolt

ASTM F468 UNS R50400 Allen Cap Bolt

Titanium Cp Grade 2 Countersunk Bolts

Titanium Cp Grade 2 Countersunk Bolts

Various types of Grade 2 Titanium Nuts

ASTM F468 UNS R50400 Lock Nuts

ASTM F468 UNS R50400 Lock Nuts

Titanium Grade 2 Square Nuts

Titanium Grade 2 Square Nuts

ASTM F468 grade 2 T-Nuts For Wood

ASTM F468 grade 2 T-Nuts For Wood

Titanium Cp Grade 2 Panel Nuts

Titanium Cp Grade 2 Panel Nuts

Grade 2 Titanium Eye Nuts

Grade 2 Titanium Eye Nuts

Titanium Grade 2 Hex Nuts

Titanium Grade 2 Hex Nuts

ASTM F468 grade 2 Jam Nuts

ASTM F468 grade 2 Jam Nuts

Titanium Gr 2 Heavy Hex Nuts

Titanium Gr 2 Heavy Hex Nuts

Titanium Gr 2 Wheel Nuts and Caps

Titanium Gr 2 Wheel Nuts and Caps

Titanium Cp Grade 2 Cage Nuts and Spring Nuts

Titanium Cp Grade 2 Cage Nuts and Spring Nuts

ASTM F468 UNS R50400 Wing Nuts

ASTM F468 UNS R50400 Wing Nuts

Ti Cp Grade 2 Self Locking Nuts

Ti Cp Grade 2 Self Locking Nuts

Grade 2 Titanium Stud Bolt Type

Grade 2 Titanium Stud Bolts

Grade 2 Titanium Stud Bolts

Titanium Gr 2 Double Ended Studs

Titanium Gr 2 Double Ended Studs

Titanium Grade 2 Tie Rod

Titanium Grade 2 Tie Rod

Titanium Cp Grade 2 Unc Stud Bolt

Titanium Cp Grade 2 Unc Stud Bolt

ASTM F468 grade 2 Fully Threaded Studs

ASTM F468 grade 2 Fully Threaded Studs

ASTM F468 UNS R50400 Threaded Rod

ASTM F468 UNS R50400 Threaded Rod

Different types of Grade 2 Titanium Screws

Commercially Pure Grade 2 Titanium Tek Screws

Commercially Pure Grade 2 Titanium Tek Screws

Commercially Pure Grade 2 Titanium Concrete Screws

Commercially Pure Grade 2 Titanium Concrete Screws

Grade 2 Titanium Socket Head Cap Screw

Grade 2 Titanium Socket Head Cap Screw

Ti Cp Grade 2 Deck Screws

Ti Cp Grade 2 Deck Screws

Grade 2 Titanium Eye Screw

Grade 2 Titanium Eye Screw

Titanium Gr 2 Thumb Screw

Titanium Gr 2 Thumb Screw

ASTM F468 grade 2 Coach Screw

ASTM F468 grade 2 Coach Screw

ASTM F468 UNS R50400 Hex Head Lag Screw

ASTM F468 UNS R50400 Hex Head Lag Screw

Titanium Grade 2 Wood Screw

Titanium Grade 2 Wood Screw

Titanium Cp Grade 2 12-Point Flange Head Cap Screws

Titanium Cp Grade 2 12-Point Flange Head Cap Screws

Titanium Grade 2 Wing Screw

Titanium Grade 2 Wing Screw

Titanium Gr 2 Hex Cap Screw

Titanium Gr 2 Hex Cap Screw

ASTM F468 grade 2 Captive Panel Screws

ASTM F468 grade 2 Captive Panel Screws

ASTM F468 UNS R50400 Allen Cap Screw

ASTM F468 UNS R50400 Allen Cap Screw

Titanium Cp Grade 2 Grub Screw

Titanium Cp Grade 2 Grub Screw

Commercially Pure Grade 2 Titanium Torx Screw

Commercially Pure Grade 2 Titanium Torx Screw

Ti Cp Grade 2 Pan Head Screw

Ti Cp Grade 2 Pan Head Screw

Ti Cp Grade 2 Fully Threaded Screw

Ti Cp Grade 2 Fully Threaded Screw

Commercially Pure Grade 2 Titanium Truss Head Screw

Commercially Pure Grade 2 Titanium Truss Head Screw

Grade 2 Titanium Flat Head Screw

Grade 2 Titanium Flat Head Screw

Grade 2 Titanium Washers Types

Grade 2 Titanium Cup Washer

Grade 2 Titanium Cup Washer

Titanium Grade 2 Lock Washer

Titanium Grade 2 Lock Washer

ASTM F468 grade 2 Countersunk Washer

ASTM F468 grade 2 Countersunk Washer

ASTM F468 UNS R50400 Belleville Washer

ASTM F468 UNS R50400 Belleville Washer

Titanium Gr 2 Square Washer

Titanium Gr 2 Square Washer

Titanium Cp Grade 2 Shim Washer

Titanium Cp Grade 2 Shim Washer

ASTM F468 grade 2 Square Washer

ASTM F468 grade 2 Square Washer

Titanium Gr 2 Penny Washer

Titanium Gr 2 Penny Washer

ASTM F468 UNS R50400 Machine Washers

ASTM F468 UNS R50400 Machine Washers

Titanium Grade 2 Square Plate Washer

Titanium Grade 2 Square Plate Washer

Polished Titanium Cp Grade 2 Washer

Polished Titanium Cp Grade 2 Washer

Ti Cp Grade 2 Ring Washers

Ti Cp Grade 2 Ring Washers

 

Typical uses of Grade 2 Titanium Fasteners

  • Sea Water, Offshore & Chemical Industry
  • Nuclear Energy Sector & Defence Industry
  • High quality Grade 2 Titanium Petrochemical Fasteners
  • Electrical & Agriculture Industry
  • Large size Grade 2 Titanium Bolts for Oil & Gas Industries
  • Engineering & Aerospace Industry
  • Grade 2 Titanium Stud Bolt for Construction
  • High Strength Grade 2 Titanium Bolts and Nuts for Automotive industry
  • Heavy duty Grade 2 Titanium Fasteners for Heat Exchangers
  • Metric Grade 2 Titanium Hex Bolts for Power Generation
  • Grade 2 Titanium Nut Bolt suitable for Off-Shore Oil Drilling

Grade 2 Titanium Bolts Testing Tool & Equipment

  • Coordinate Measuring Machine
  • Roughness tester used to test the surface finish of a Grade 2 Titanium Bolts and Nuts
  • Image measuring instrument
  • Micrometer for accurate measurement of Grade 2 Titanium Fasteners
  • Thread gauge and Smooth plug gauge used to check Grade 2 Titanium Screws and Nuts quickly
  • Routine inspection of calipers

Titanium Grade 2 Nuts Sizes

Titanium Gr 2 Finished Hex Nuts sizes as per ANSI/ASME B18.2.2

Titanium Grade 2 Nuts Sizes

Nominal or Basic Major Diameter of Nut Thread

 Grade 2 Titanium Nuts Width Across Flats (F)

 Width Across Corners (G) Thickness of Titanium Grade 2 Hex Nuts (H) 
Basic Max Min  Max  Min Basic  Max Min 
1/4 0.2500 7/16 .438 .428 .505 .488 7/32 0.226 0.212
5/16 0.3125 1/2 .500 .489 .577 .557 17/64 0.273 0.258
3/8 0.3750 9/16 .562 .551 .650 .628 21/64 0.337 0.320
7/16 0.4375 11/16 .688 .675 .794 .768 3/8 0.385 0.365
1/2 0.5000 3/4 .750 .736 .866 .840 7/16 0.448 0.427
9/16 0.5625 7/8 .875 .861 1.010 .982 31/64 0.496 0.473
5/8 0.6250 15/16 .938 .922 1.083 1.051 35/64 0.559 0.535
3/4 0.7500 1-1/8 1.125 1.088 1.299 1.240 41/64 0.665 0.617
7/8 0.8750 1-5/16 1.312 1.269 1.516 1.447 3/4 0.776 0.724
1 1.0000 1-1/2 1.500 1.450 1.732 1.653 55/64 0.887 0.831
1-1/8 1.1250 1-11/16 1.688 1.631 1.949 1.859 31/32 0.999 0.939
1-1/4 1.2500 1-7/8 1.875 1.812 2.165 2.066 1-1/16 1.094 1.030
1-3/8 1.3750 2-1/16 2.062 1.994 2.382 2.273 1-11/64 1.206 1.138
1-1/2 1.5000 2-1/4 2.250 2.175 2.598 2.480 1-9/32 1.317 1.245
1-5/8 1.6250 2-7/16 2.438 2.356 2.815 2.686 1-25/64 1.429 1.353
1-3/4 1.7500 2-5/8 2.625 2.538 3.031 2.893 1-1/2 1.540 1.460
2 2.000 3 3.000 2.900 3.464 3.306 1-23/32 1.763 1.675
2-1/4 2.2500 3-3/8 3.375 3.263 3.897 3.719 1-15/16 1.986 1.890
2-1/2 2.5000 3-3/4 3.750 3.625 4.330 4.133 2-5/32 2.209 2.105
2-3/4 2.7500 4-1/8 4.125 3.988 4.763 4.456 2-3/8 2.431 2.319
3 3.000 4-1/2 4.500 4.350 5.196 4.959 2-19/32 2.654 2.534

ASTM F468 grade 2 Screws Sizes

Titanium Gr 2 Screw Size Body Dia Hex Key Size Head Height Head Dia Maximum Thread Length Minimum Thread Length
No. 0 0.06 0.05 0.06 0.096 5/8 3/8
No. 1 0.073 1/16 0.073 0.118 7/8 3/8
No. 2 0.086 5/64 0.086 0.14 7/8 1/2
No. 3 0.099 5/64 0.099 0.161 7/8 1/2
No. 4 0.112 3/32 0.112 0.183 11/8 11/16
No. 5 0.125 3/32 0.125 0.205 1 11/16
No. 6 0.138 7/64 0.138 0.226 11/8 11/16
No. 8 0.164 9/64 0.164 0.27 11/4 3/4
No. 10 0.19 5/32 0.19 0.312 13/8 15/16
No. 12 0.216 5/32 0.216 0.345 11/4 15/16
1/4 0.250 3/16 1/4 3/8 11/2 15/16
5/16 0.3125 1/4 5/16 15/32 1-3/4 1-1/16
3/8 0.375 5/16 3/8 9/16 2 1-3/16
7/16 0.438 3/8 7/16 21/32 2-1/4 13/16
1/2 0.500 3/8 1/2 3/4 2-1/2 1-3/8
9/16 0.5625 7/16 9/16 27/32 2-7/16 1-5/8
5/8 0.625 1/2 5/8 15/16 3 1-5/8
3/4 0.750 5/8 3/4 11/8 3-1/2 1-7/8
7/8 0.875 3/4 7/8 15/16 3-3/4 2-1/16
1 1.000 3/4 1 11/2 4-1/2 2-1/4
1-1/8 1.125 7/8 1-1/8 111/16 4-21/32 2-13/16
1-1/4 1.250 7/8 1-1/4 17/8 5-3/32 3-1/8
1-1/2 1.500 1 1-1/2 21/4 6-5/64 3-3/4
1-3/4 1.750 11/4 1-3/4 25/8 7-1/8 4-3/8
2 2.000 11/2 2 3 8-7/64 5

Grade 2 Titanium Fasteners Torque Chart

Maximum Ti Cp Grade 2 Fasteners Torque - in Nm
Thread Diameter 8mm 3mm 4mm 5mm 6mm 12mm 10mm 14mm
Titanium Grade 2 Socket Cap Bolt 25.00 1.73 4.00 10.00 14.00 - 38.00 -
Titanium Grade 2 Flanged Hex Head Bolt 35.00 2.00 5.00 12.00 15.00 97.50 38.00 155.20
Titanium Grade 2 Dome Head / Fairing Bolt 16.00 - 3.50 5.00 11.00 - 26.00 -
Titanium Grade 2 Countersunk Bolt 15.00 - 3.50 5.00 8.00 - 20.00 -

Titanium Gr 2 Washer Sizes

Grade 2 Titanium SAE Flat Washers
Size Inside Diameter Outside Diameter Thickness
#2 3/32" 1/4" .020"
#4 1/8" 5/16" 1/32"
#6 5/32" 3/8" 3/64"
#8 3/16" 7/16" 3/64"
#10 7/32" 1/2" 3/64"
1/4 9/32" 5/8" 1/16"
5/16 11/32" 11/16" 1/16"
3/8 13/32" 13/16" 1/16"
7/16 15/32" 59/64" 1/16"
1/2 17/32" 1-1/16" 3/32"
9/16 19/32" 1-3/16" 3/32"
5/8 21/32" 1-5/16" 3/32"
3/4 13/16" 1-1/2" 9/64"
7/8 15/16" 1-3/4" 9/64"
1" 1-1/16" 2" 9/64"
1-1/8 1-3/16" 2-1/4" 9/64"
1-1/4 1-5/16" 2-1/2" 5/32"
1-1/2 1-7/16" 3" 3/16"
1-5/8 1-3/4" 3-3/4" 3/16"
1-3/4 1-7/8" 4" 3/16"
2 2-1/8" 4-1/2" 3/16"

ASTM F468 UNS R50400 Bolts Sizes

ASME B18.2.1 Titanium Cp Grade 2 Hex Head Bolt size (Inch Series)

ASTM F468 UNS R50400 Bolts Sizes

Nominal or Basic Product Diameter E F G H J LT (Thread Length) Y
Body Diameter Width Across Flats Width Across Corners Head Height Wrenching Height For Screw Lengths For Screw Lengths Transition Thread Length
1/4 0.25 0.25 0.245 7/16 0.438 0.428 0.505 0.488 5/32 0.163 0.150 0.106 0.750 1.000 0.250
5/16 0.3125 0.3125 0.3065 1/2 0.500 0.489 0.577 0.557 13/64 0.211 0.195 0.140 0.875 1.125 0.278
3/8 0.375 0.375 0.369 9/16 0.562 0.551 0.650 0.628 15/64 0.243 0.226 0.160 1.000 1.250 0.312
7/16 0.4375 0.4375 0.4305 5/8 0.625 0.612 0.722 0.698 9/32 0.291 0.272 0.195 1.125 1.375 0.357
1/2 0.5 0.5 0.493 3/4 0.750 0.736 0.866 0.840 5/16 0.323 0.302 0.215 1.250 1.500 0.385
9/16 0.5625 0.5625 0.5545 13/16 0.812 0.798 0.938 0.910 23/64 0.371 0.348 0.250 1.375 1.625 0.417
5/8 0.625 0.625 0.617 15/16 0.938 0.922 1.083 1.051 25/64 0.403 0.378 0.269 1.500 1.750 0.455
3/4 0.75 0.75 0.741 1-1/8 1.125 1.100 1.299 1.254 15/32 0.483 0.455 0.324 1.750 2.000 0.500
7/8 0.875 0.875 0.866 1-5/16 1.312 1.285 1.516 1.465 35/64 0.563 0.531 0.378 2.000 2.250 0.556
1 1 1 0.99 1-1/2 1.500 1.469 1.732 1.675 39/64 0.627 0.591 0.416 2.250 2.500 0.625
1-1/8 1.125 1.125 1.114 1-11/16 1.688 1.631 1.949 1.859 11/16 0.718 0.658 0.461 2.500 2.750 0.714
1-1/4 1.25 1.25 1.239 1-7/8 1.875 1.812 2.165 2.066 25/32 0.813 0.749 0.530 2.750 3.000 0.714
1-1/2 1.5 1.5 1.488 2-1/4 2.250 2.175 2.598 2.480 15/16 0.974 0.902 0.640 3.250 3.500 0.833

Chemical Composition of Grade 2 Titanium Fasteners

Titanium Gr 2
Fe
H
C
Ti
N
O
V
Al
0.3 max
0.015 max
0.1 max
99.2 min
0.03 max
0.25 max
–
–

Mechanical Properties of Titanium Grade 2 Nut Bolt

Density
Elongation
Melting Point
Yield Strength (0.2%Offset)
Tensile Strength
4.5 g/cm3
20 %
1665 °C (3030 °F)
Psi – 39900 , MPa – 275
Psi – 49900 , MPa – 344

ASTM F468 grade 2 Fasteners Equivalent Grade

STANDARD
UNS
WERKSTOFF NR.
Titanium Gr 2
R50400
3.7035

Grade 2 Titanium Fasteners Price List

Products FOB Price US $
Din934 ASME B18.2.1 Grade 2 Titanium Hex head Bolt and Nuts US $0.02/ Piece
Anodizing pure gr2 titanium fasteners (colored) US $0.30-$20.00/ Piece
Titanium Gr2 u bolts and nuts, Ti alloy Aerospace fasteners US $3.50-$4.70/ Piece
bicycle grade 2 titanium fasteners m8 x 45 hex head long bolt blue US $0.60-$6.50/ Piece
DIN975 DIN976 Grade 2 Titanium Threaded Rod US $0.01-$0.03/ Piece
Gr 2 Titanium Bolts Washers Gaskets Screws Fasteners US $1.80/ Piece
Grade 2 Titanium Socket cap screws US $0.69-$10.00/ Piece
DIN6921 GR2 titanium flange bolts various color options US $0.10-$15.00/ Piece
Titanium grade 2 round head carriage bolts US $0.01-$0.15/ Piece
Grade 2 Titanium Bolt & Hexagon Socket Screws Fastener (Lengths M6 10-120mm) US $0.80-$3.00/ Piece
ASTM B348 Titanium Grade 2 Fasteners US $0.10-$10.00/ Unit
Titanium GR2 double ends studs bolts and threaded rod US $3.50-$4.70/ Piece

Call us or send us an email to sales@jigneshsteel.com for more details. Always compare our price with other Grade 2 Titanium Fasteners manufacturers in India or China

fasteners
Flanges

Fittings

Pipes

Weight Calculator

© 2020 All Rights Reserved by Jignesh Steel

We are On: