ASTM F593 Bolts and F593C Threaded Rod/ F593d Hex Bolt/ Studs/ Screws

+(91) 022-6659 5844
sales@jigneshsteel.com

F593C Hex Bolts and ASTM F593 316 Stainless Steel Hex Head Screw manufacturer in India

ASTM F593 specification covers the requirements for SS Nut bolt. F593 Bolt has a great variety of surface finishes, from matt to bright and including brushed and engraved. It is used by architects for interior design, building envelopes, and street furniture. F593C Bolt has strong mechanical properties at ambient temperatures. It provides a mixture of ductility, elasticity and hardness. Hence it enables it to be used in difficult metal forming modes such as deep stamping, flat bending, extrusion, etc. While providing resistance to heavy wear it furthermore offers good mechanical behavior at both low and high temperatures. ASTM F593C Hex Bolts has excellent corrosion and heat resistance with good mechanical properties over a wide range of temperatures. It is typically used to create a bolted joint, in which a threaded shaft exactly fits a corresponding tapped hole or nut. ASTM F593D Flange Bolts has similar properties to mild steel but better corrosion, heat, and cracking resistance. ASTM F593G Socket Head Cap Screws are usually used in machine assembly for removing panels and parts. It has round cap with a hex head and are tightened with a socket wrench drive. Long socket head caps are easier to see when fastened, while button and flat socket head caps are less likely to snag clothing or linkages.ASTM F593 Bolts are for general purpose applications. It is a non-tapered fastener that uses a washer and nut to hold objects together. ASTM F593 Threaded Rod is resistance to corrosion and staining, low maintenance, and familiar luster makes it an ideal material for many applications where both the strength of steel and corrosion resistance is required. With a minimum content of chromium of 10.5%, ASTM F593 316 Stainless Steel Hex Head Screw is been continuously protected by a passive layer of chromium oxide that forms naturally on the surface through the reaction of the chromium with oxygen from air or water. If its surface is scratched, it regenerates itself. This particularity gives it corrosion resistance.

ASTM F593 Bolts

ASTM F593 Threaded Rod

F593C Bolt

ASTM F593D Bolt

ASTM F593G Bolt

F593H Bolt

High integrity ASTM F593C Bolt manufacturers in India providing Tailored solutions for bolted joints

ASTM F593 Bolts Specifications
F593 Bolt Alloy Group Chart
ASTM F593 Bolts Type
Most common types of ASTM F593 Nuts
Types of ASTM F593 Threaded Rod and Stud
ASTM F593 Screws Types
Types of ASTM F593 Washers
F593 Stainless Hex Bolts Dimensions
Stainless Steel F593 Hex Nuts Dimensions
F593 Stainless Steel Flat Washer Dimensions
Stainless F593 Socket Head Cap Screw Dimensions
Uses and application of ASTM F593 Fasteners
F593 Stainless Bolts Testing Tool & Equipment
Stainless Steel F593 Nuts Sizes
F593 Stainless Steel Screws Sizes
F593 Bolt Torque
Stainless F593 Washer Sizes
ASTM F593 18-8 Stainless Steel Bolts Sizes
Chemical Composition of F593 Stainless Hex Bolts
Mechanical Properties of Stainless Steel F593 Nut Bolt
F593 Stainless Steel Fasteners Hardware Selection
F593 Bolts Price List
ASTM F593 Bolts Weight Calculator

ASTM F593 Bolts Specifications

Manufacturer and supplier of ASTM F593D Flange Bolts and F593 18-8 Stainless Steel Stud Bolt, view online price list

F593 Bolt grade	ASTM F593C ASTM F593D ASTM F593G ASTM F593H
Size Metric of Stainless Steel F593 Bolts	Dia: M10 - M110 Length: 12 - 1200MM
ASTM F593 Hex Bolts Sizes in Inch	Dia: 1/2" - 4.0" Length: 1/2" - 52"
F593 Stainless Fasteners manufacturing process and sizes	Cold Forming process: M2-M24 Hot Forging process: M24-M100, 1-1/2” Dia, up to 1100mm lg CNC Machining for M100 / 4” Dia, up to 1500mm lg
Standard length of ASTM F593 Bolts	3 mm to 200 mm
Stainless F593 Bolts & Screws US Threads	METRIC, BSW, Unified national fine (UNF), Unified national extra fine (UNEF), UNJC, UNJF, UNR, BSF, UNK, Unified national coarse (UNC), Constant-pitch threads
ASTM F593 Bolts UTS - Unified Thread Standard	UNC, UNS, UNF, NPT, NPTF, UNEF
ASTM F593 Bolts Head drive	Phillips/Slot, Phillips, Slotted, Six-Lobe, etc
Material Origin	ASTM F593 Bolts are Western European. Eastern origin possible on request.
Free Samples	Yes
ASTM F593 Nut Bolt Surface Finish & Coating	ZAC (Zinc Alluminium Flake Coating) Ptfe Coated F593 Stainless Bolts Dacroment Teflon Xylon Self-Colour Manganese Phosphate Zinc Electro Plating (Hexavalent or Trivalent Chrome) Phosphate Cadmium Plated zinc-nickel Anodizing Geometry Nickel plated Zinc Phosphate (yellow, blue, white, black) Black oxide Bright Zinc Plated (BZP) Sherardized All Stainless Steel F593 Fasteners surface finishes can be supplied including Galvanised, Zinc, Sherardized, Dacromet, Electroless Nickel, Geomet & PTFE.
Other ASTM F593 Bolts manufacturers	Omni, APL, Kundan, Deepak Fasteners, Unbrako, Sundaram Precision, Infasco, Caparo, EBY Fastener, SPAX® Screws, GKW Etc.
Why Jignesh Steel?	Pre-production ASTM F593 18-8 Stainless Steel Fasteners sample before mass production An Indian manufacturer, established in Year 2008 Wide International network : Western Europe, Eastern Europe, Middle East, Southeast Asia, North America, and South America Highly professional and technical team Always final Inspection before shipment High precision threads Best Price in India compared to ASTM F593 Bolts manufacturers in China
MOQ	5 pieces
Port of Dispatch	Mumbai or Kalamboli ports in Maharashtra state of India
Preferred F593 Stainless Nut Bolt Drawing Formats	JPEG, PDF, CAD, STP, IGS
F593 Stainless Steel Fasteners types	J Bolts, Machine Screw, U Bolts, Cap Screw, Washers, Marine Anchors, Socket Screw, Bolts, Wing Screw, Square Nut, Hex Set Screw, Pan Head Screw, Socket Hexagon Head Screw, T-Head Bolts, Structural Bolts, Eye Bolt, Mushroom Head Square Neck Bolts, Nut, Hexagon Nut, Socket Head Cap Screw, Studs, Allen Cap screw, Wing Screw, Stud Bolts, Sockets, Foundation Bolts, Hex Domed Cap Nuts, Spring Washers, Screws, Screw, Anchor Bolt, Hex Coupling Nut, Nuts, Hex Nut, Studs, Anchors, Hex Head Bolts
Payment Terms	T/T, Western Union, Paypal, L/C or Trade Assurance 30% deposit & balance before shipping
Ask for Test Certificates from ASTM F593 Bolts manufacturers	Suitability for preloading to EN 14399-2 Manufacturer Test Certificate (MTC) as per EN 10204 / 3.1, Stainless Steel F593 Bolts Tensile testing to ISO 898-1 Hardness testing to ISO 6508-1 Suitability test for calibrated preload to EN 14399-10 Tri-Roll Thread Comparators F593 Stainless Steel Bolts Charpy Impact testing in accordance with ISO 148-1 Calibrated gauges and tools Nut proof load testing to ISO 898-2
Stainless F593 Fasteners Application and Uses	Industrial, Wind tower, Railway, Nuclear power, Construction, Electronic, and Automotive industry
Delivery time	Regular product is about 7-15 days
Standard	Manufacturer of ASTM F593 Bolts as per IS, ANSI, ASTM, DIN, ISO, JIS, GB, ASME, BS, UNI, CSN, EU, IFI, PN, and all International Standards ANSI B 18.2.4 2M ANSI B 28.2.4 1M ANSI - American National Standards Institute GB/T5783, GB/T5782, GB5783 American ASME Indian IS International ISO American SAE German DIN Spanish CSN British BS Italian UNI Polish PN European EU
ISO - International Organization for Standardization	ISO 4014 Hex Bolt ISO 4017 Hex Head Screw ISO 4032 Nut ISO 4162 Flange Bolts ISO 4161 Flange Nut

F593 Bolt Alloy Group Chart

ASTM F593 Bolt
ASTM F593 Alloy Groups	ASTM F593 Bolting Material Designation	Condition	Material Type
1	304, 303, 304L, 305, 384, XM1, 18-9LW, 302HQ, 304J3, 303Se	Cold Worked (CW)	Austenitic
2	316, 316L	Cold Worked (CW)	Austenitic
3	321, 347	Cold Worked (CW)	Austenitic
4	430, 430F	Cold Worked (CW)	Ferritic
5	410, 416, 416Se	Hardened and Tempered (H)	Martensitic
6	431	Hardened and Tempered (H)	Martensitic
7	630 (17-4PH)	Age Hardened (AH)	Precipitation Hardening

ASTM F593 Bolts Type

F593 Stainless Flange Bolts

Stainless Steel F593 Hex Bolts

F593 Stainless Steel Square Bolts

Stainless F593 Heavy Hex Bolts

ASTM F593 18-8 Stainless Steel U Bolts

F593 CW Stainless Eye Bolts

Stainless F593 Anchor Bolts

Stainless Steel F593 Hex Head Bolts

F593 Stainless Steel Carriage Bolts

F593 Stainless Lag Bolts

ASTM F593 18-8 Stainless Steel Allen Cap Bolt

F593 CW Stainless Countersunk Bolts

Most common types of ASTM F593 Nuts

ASTM F593 18-8 Stainless Steel Lock Nuts

F593 CW Stainless Panel Nuts

Stainless Steel F593 Square Nuts

F593 Stainless Steel T-Nuts For Wood

F593 Stainless Eye Nuts

Stainless F593 Heavy Hex Nuts

Stainless Steel F593 Hex Nuts

F593 Stainless Steel Jam Nuts

Stainless F593 Wheel Nuts and Caps

ASTM F593 18-8 Stainless Steel Wing Nuts

F593 CW Stainless Cage Nuts and Spring Nuts

ASTM F593 316 Stainless Steel Self Locking Nuts

Types of ASTM F593 Threaded Rod and Stud

F593 Stainless Stud Bolts

Stainless F593 Double Ended Studs

Stainless Steel F593 Tie Rod

F593 Stainless Steel Fully Threaded Studs

ASTM F593 18-8 Stainless Steel Threaded Rod

F593 CW Stainless Unc Stud Bolt

ASTM F593 Screws Types

F593 grade 630 Tek Screws

ASTM F593 316 Stainless Steel Deck Screws

F593 grade 630 Concrete Screws

F593 Stainless Socket Head Cap Screw

F593 Stainless Eye Screw

Stainless F593 Thumb Screw

Stainless Steel F593 Wood Screw

F593 Stainless Steel Coach Screw

ASTM F593 18-8 Stainless Steel Hex Head Lag Screw

F593 CW Stainless 12-Point Flange Head Cap Screws

Stainless Steel F593 Wing Screw

F593 Stainless Steel Captive Panel Screws

Stainless F593 Hex Cap Screw

ASTM F593 18-8 Stainless Steel Allen Cap Screw

F593 CW Stainless Grub Screw

ASTM F593 316 Stainless Steel Fully Threaded Screw

F593 grade 630 Torx Screw

ASTM F593 316 Stainless Steel Pan Head Screw

F593 grade 630 Truss Head Screw

F593 Stainless Flat Head Screw

Types of ASTM F593 Washers

F593 Stainless Cup Washer

Stainless F593 Square Washer

Stainless Steel F593 Lock Washer

F593 Stainless Steel Countersunk Washer

ASTM F593 18-8 Stainless Steel Belleville Washer

F593 CW Stainless Shim Washer

Stainless Steel F593 Square Plate Washer

F593 Stainless Steel Square Washer

Stainless F593 Penny Washer

ASTM F593 18-8 Stainless Steel Machine Washers

Polished F593 CW Stainless Washer

ASTM F593 316 Stainless Steel Ring Washers

F593 Stainless Hex Bolts Dimensions

View ASTM F593G Socket Head Cap Screws and F593 Stainless Steel Threaded Rod material tensile strength and torque values

Heavy Hex Bolt Diameter	D	F			C		H
	Body Diameter	Width Across Flats			Width Across Corners		Height
	Max	Basic	Max	Min	Max	Min	Basic	Max	Min
1/2	0.515	7/8	0.875	0.850	1.010	0.969	11/32	0.364	0.302
5/8	0.642	1-1/16	1.062	1.031	1.227	1.175	27/64	0.444	0.378
3/4	0.768	1-1/4	1.250	1.212	1.443	1.383	1/2	0.524	0.455
7/8	0.895	1-7/16	1.438	1.394	1.660	1.589	37/64	0.604	0.531
1	1.022	1-5/8	1.625	1.575	1.876	1.796	43/64	0.700	0.591
1-1/8	1.149	1-13/16	1.812	1.756	2.093	2.002	3/4	0.780	0.658
1-1/4	1.277	2	2.00	1.938	2.309	2.209	27/32	0.876	0.749
1-3/8	1.404	2-3/16	2.188	2.119	2.526	2.416	29/32	0.940	0.810
1-1/2	1.531	2-3/8	2.375	2.300	2.742	2.622	1	1.036	0.902
1-3/4	1.785	2-3/4	2.750	2.662	3.175	3.035	1-5/32	1.196	1.054
2	2.039	3-1/8	3.125	3.025	3.608	3.449	1-11/32	1.388	1.175
2-1/4	2.305	3-1/2	3.500	3.388	4.041	3.862	1-1/2	1.548	1.327
2-1/2	2.559	3-7/8	3.875	3.750	4.474	4.275	1-21/32	1.708	1.479

Stainless Steel F593 Hex Nuts Dimensions

Extensive range of M3 M4 M5 ASTM F593 CW Stainless Heavy Hex Bolts, F593H Csk Allen Bolt & F593 grade 630 Fasteners in India

F593 Stainless Steel Metric Nut Dimensions Chart in mm

F593 Stainless Metric Nut Size	Thread Pitch	s		e	m
		Width Across Flats		Width Across Corners	Height of the Stainless Steel F593 Nut
		max.	min.	min.	max.	min.
M1.6	0.35	3.20	3.02	3.41	1.30	1.05
M2	0.4	4.00	3.82	4.32	1.60	1.35
M2.5	0.45	5.00	4.82	5.45	2.00	1.75
M3	0.5	5.50	5.32	6.01	2.40	2.15
M3.5*	0.6	6.00	5.82	6.58	2.80	2.55
M4	0.7	7.00	6.78	7.66	3.2	2.9
M5	0.8	8.00	7.78	8.79	4.7	4.4
M6	1	10.00	9.78	11.05	5.2	4.9
M8	1.25	13.00	12.73	14.38	6.80	6.44
M10	1.5	16.00	15.73	17.77	8.40	8.04
M12	1.75	18.00	17.73	20.03	10.80	10.37
M14*	2	21.00	20.67	23.36	12.8	12.1
M16	2	24.00	23.67	26.75	14.8	14.1
M18*	2.5	27.00	26.16	29.56	15.8	15.1
M20	2.5	30.00	29.16	32.95	18.0	16.9
M22*	2.5	34	33	37.29	19.4	18.1
M24	3	36	35	39.55	21.5	20.2
M27*	3	41	40	45.2	23.8	22.5
M30	3.5	46	45	50.85	25.6	24.3
M33*	3.5	50	49	55.37	28.7	27.4
M36	4	55.0	53.8	60.79	31.0	29.4
M39*	4	60.0	58.8	66.44	33.4	31.8
M42	4.5	65.0	63.1	71.3	34.0	32.4
M45*	4.5	70.0	68.1	76.95	36.0	34.4
M48	5	75.0	73.1	82.6	38.0	36.4
M52*	5	80.0	78.1	88.25	42.0	40.4
M56	5.5	85.0	82.8	93.56	45.0	43.4
M60*	5.5	90.0	87.8	99.21	48.0	46.4
M64	6	95.0	92.8	104.86	51.0	49.1

Notes:

* Non-preferred threads according to standard.
All dimensions are given in mm millimeters.

F593 Stainless Steel Flat Washer Dimensions

ISO 7089 F593 Stainless Flat Washer dimensions (all units in mm)

For Screw Nominal Size	Hole Diameter	Outside Diameter (OD)	Stainless Steel F593 Washer Thickness
M1.6	1.7	4	0.3
M2	2.2	5	0.3
M2.5	2.7	6	0.5
M2.6	2.8	7	0.5
M3	3.2	7	0.5
M3.5	3.7	8	0.5
M4	4.3	9	0.8
M5	5.3	10	1
M6	6.4	12	1.6
M7	7.4	14	1.6
M8	8.4	16	1.6
M10	10.5	20	2
M12	13	24	2.5
M14	15	28	2.5
M16	17	30	3
M18	19	34	3
M20	21	37	3
M22	23	39	3
M24	25	44	4
M27	28	50	4
M30	31	56	4
M33	34	60	5
M36	37	66	5
M39	40	72	6
M42	43	78	7
M45	46	85	7
M48	50	92	8
M52	54	98	8
M56	58	105	9

Stainless F593 Socket Head Cap Screw Dimensions

American National Standard ANSI/ASME B18.3.1M F593 Stainless Socket Head Cap Screws

Stainless Steel F593 Screw Nom. Size Thread Pitch	Body Diameter D		Head Diameter A		Head Height H		Chamfer or Radius S	Hexagon Socket Size J	Spline Socket Sizea M	Key Engagement T	Transition Dia. B
Stainless Steel F593 Screw Nom. Size Thread Pitch	Max	Min	Max	Min	Max	Min	Max	Nom.	Nom.	Min	Max
M1.6 × 0.35	1.60	1.46	3.00	2.87	1.60	1.52	0.16	1.5	1.829	0.80	2.0
M2 × 0.4	2.00	1.86	3.80	3.65	2.00	1.91	0.20	1.5	1.829	1.00	2.6
M2.5 × 0.45	2.50	2.36	4.50	4.33	2.50	2.40	0.25	2.0	2.438	1.25	3.1
M3 × 0.5	3.00	2.86	5.50	5.32	3.00	2.89	0.30	2.5	2.819	1.50	3.6
M4 × 0.7	4.00	3.82	7.00	6.80	4.00	3.88	0.40	3.0	3.378	2.00	4.7
M5 × 0.8	5.00	4.82	8.50	8.27	5.00	4.86	0.50	4.0	4.648	2.50	5.7
M6 × 1	6.00	5.82	10.00	9.74	6.00	5.85	0.60	5.0	5.486	3.00	6.8
M8 × 1.25	8.00	7.78	13.00	12.70	8.00	7.83	0.80	6.0	7.391	4.00	9.2
M10 × 1.5	10.00	9.78	16.00	15.67	10.00	9.81	1.00	8.0	…	5.00	11.2
M12 × 1.75	12.00	11.73	18.00	17.63	12.00	11.79	1.20	10.0	…	6.00	14.2
M14 × 2b	14.00	13.73	21.00	20.60	14.00	13.77	1.40	12.0	…	7.00	16.2
M16 × 2	16.00	15.73	24.00	23.58	16.00	15.76	1.60	14.0	…	8.00	18.2
M20 × 2.5	20.00	19.67	30.00	29.53	20.00	19.73	2.00	17.0	…	10.00	22.4
M24 × 3	24.00	23.67	36.00	35.48	24.00	23.70	2.40	19.0	…	12.00	26.4
M30 × 3.5	30.00	29.67	45.00	44.42	30.00	29.67	3.00	22.0	…	15.00	33.4
M36 × 4	36.00	35.61	54.00	53.37	36.00	35.64	3.60	27.0	…	18.00	39.4
M42 × 4.5	42.00	41.61	63.00	62.31	42.00	41.61	4.20	32.0	…	21.00	45.6
M48 × 5	48.00	47.61	72.00	71.27	48.00	47.58	4.80	36.0	…	24.00	52.6

Uses and application of ASTM F593 Fasteners

Nuclear Energy Sector
Defence Industry
Sea Water Equipment
Offshore & Chemical Industry
Electrical & Agriculture Industry
Engineering & Aerospace Industry
ASTM F593 Stud Bolt for Construction
High quality ASTM F593 Petrochemical Fasteners
High Strength ASTM F593 Bolts and Nuts for Automotive industry
Large size ASTM F593 Bolts for Oil & Gas Industries
Metric ASTM F593 Hex Bolts for Power Generation
ASTM F593 Nut Bolt suitable for Off-Shore Oil Drilling
Heavy duty ASTM F593 Fasteners for Heat Exchangers

F593 Stainless Bolts Testing Tool & Equipment

Coordinate Measuring Machine
Image measuring instrument
Routine inspection of calipers
Roughness tester used to test the surface finish of a ASTM F593 Bolts and Nuts
Micrometer for accurate measurement of ASTM F593 Bolts
Thread gauge and Smooth plug gauge used to check ASTM F593 Screws and Nuts quickly

Stainless Steel F593 Nuts Sizes

Stainless F593 UNC Heavy Hex Nuts sizes as per ANSI/ASME B18.2.2

UNC F593 Stainless Heavy hex nut dimensions
Nut N/B	Maximum Across Corners	Min Across Corners	Maximum Thickness	Min Thickness	Maximum Across Flats	Maximum Across Flats
3/8	20.2	19.4	9.6	8.7	17.5	17
7/16	22	21.1	11.2	10.2	19	18.5
1/2	25.6	24.6	12.8	11.8	22.2	21.6
9/16	27.5	26.3	14.4	13.4	23.8	23.1
5/8	31.2	29.8	16	14.9	27	26.2
3/4	36.7	35.1	19.3	18	31.8	30.8
7/8	42.2	40.4	22.5	21.2	36.5	35.4
1	47.7	45.6	25.7	24.3	41.3	40
1 1/8	53.2	50.8	28.9	27.4	46	44.6
1 1/4	58.6	56.1	31.8	30.1	50.8	49.2
1 3/8	64.2	61.4	35	33.3	55.6	53.8
1 1/2	69.6	66.6	38.2	36.4	60.3	58.4
1 5/8	75.2	71.8	41.5	39.5	65.1	63
1 3/4	80.6	77.1	44.7	42.6	69.9	67.6
1 7/8	86.2	82.3	47.9	45.8	74.6	72.2
2	91.6	87.6	51.1	48.9	79.4	76.8
2 1/4	102.6	98.1	57.2	54.7	88.9	86.1
2 1/2	113.6	108.6	63.6	61	98.4	95.2
2 3/4	124.6	119.1	70.1	67.2	108	104.4
3	135.6	129.6	76.5	73.5	117.5	113.7

F593 Stainless Steel Screws Sizes

BS 2470 Stainless F593 Hexagon Socket Head Screw (1936 SERIES) G

F593 Stainless Screw Size and Thread Dia D	Thread Pitch		Length of Thread B	Head diameter dk		Diameter of unthreaded shank dw		Head Thickness k		Width across flats s	Radius under head r		Hex socket depth t	Wall thickness w
	UNC	UNF	min	max.	min.	max.	min.	max.	min.	nom.	max.	min.	min.	min.
0	-	8000%	0.5	0.096	0.093	0.6	0.0568	0.06	0.057	0.05	0.007	0.003	0.025	0.019
1	64	7200%	0.625	0.118	0.114	0.073	0.0695	0.073	0.07	0.05	0.007	0.003	0.031	0.023
2	56	6400%	0.625	0.14	0.136	0.086	0.0822	0.086	0.083	1/161/16	0.008	0.004	0.038	0.028
3	48	5600%	0.625	0.161	0.157	0.099	0.0949	0.099	0.095	5/645/64	0.008	0.004	0.044	0.032
4	40	4800%	0.75	0.183	0.178	0.112	0.1075	0.112	0.108	5/645/64	0.009	0.005	0.051	0.036
5	40	4400%	0.75	0.205	0.2	0.125	0.1202	0.125	0.121	3/323/32	0.01	0.006	0.057	0.04
6	32	4000%	0.75	0.226	0.221	0.138	0.1329	0.138	0.134	3/323/32	0.01	0.006	0.064	0.044
8	32	3600%	0.875	0.27	0.265	0.164	0.1585	0.164	0.159	1/81/8	0.012	0.007	0.077	0.052
10	24	3200%	0.875	5/165/16	0.306	0.19	0.184	0.19	0.185	5/325/32	0.014	0.009	0.09	0.061
12	24	2800%	0.875	0.343	0.332	0.216	0.21	0.216	0.201	5/325/32	0.014	0.009	0.11	0.074
1/41/4	20	2800%	1	3/83/8	0.367	0.25	0.2435	1/41/4	0.233	3/163/16	0.014	0.009	0.12	0.08
5/165/16	18	2400%	1.125	7/167/16	0.429	0.3125	0.3053	5/165/16	0.306	7/327/32	0.017	0.012	0.151	0.1
3/83/8	16	2400%	1.25	9/169/16	0.553	0.375	0.3678	3/83/8	0.368	5/165/16	0.02	0.015	0.182	0.12
7/167/16	14	2000%	1.375	5/85/8	0.615	0.4375	0.4294	7/167/16	0.43	5/165/16	0.023	0.018	0.213	0.14
43467	13	2000%	1.5	43528	0.739	0.5	0.4919	43467	0.492	43532	0.026	0.02	0.245	0.16
43724	12	1800%	1.625	0.812	0.795	0.5625	0.554	0.562	0.553	43532	0.03	0.022	0.276	0.18
43593	11	1800%	1.75	43654	0.863	0.625	0.6163	43593	0.616	43467	0.032	0.024	0.307	0.2
43528	10	1600%	2	1	0.987	0.75	0.7406	43528	0.74	43724	0.039	0.03	0.37	0.24
43654	9	1400%	2.25	1.1/8	1.111	0.875	0.8647	43654	0.864	43724	0.044	0.034	0.432	0.28
1	8	14/12	2.5	1.5/16	1.297	1	0.98861	1	0.988	43593	0.05	0.04	0.495	0.32
1.1/8	7	1200%		1.5		1.125	1.1086	1.125	1.111	43528			0.557	0.428
1.1/4	7	1200%		1.75		1.25	1.2336	1.25	1.236	43528			0.62	0.475
1.3/8	6	1200%		1.875		1.375	1.3568	1.375	1.36	43528			0.682	0.523
1.1/2	6	1200.00%		2		1.5	1.4818	1.5	1.485	1			0.745	0.57
1.3/4	5	-		2.5		1.75	1.7295	1.75	1.734	1.1/4			0.87	0.665
2	4.1/2	-		2.75		2	1.978	2	1.983	1.3/8			0.995	0.76

F593 Bolt Torque

		ASTM F593 Cold Worked				ASTM F837 CW
			Tightening Torque				Tightening Torque
Nominal Size	Threads per inch	Lubricated Clamp Load (lbs)	Lubricated K = 0.16	Dry K = 0.35	Dry Clamp Load (lbs.)	Lubricated Clamp Load (lbs)	Lubricated K = 0.16	Dry K = 0.35		Dry Clamp Load (lbs.)
Coarse Thread Series
2	56					111	1.5 in-lbs	1.8	in-lbs	59
4	40					181	3.2		3.8	97
6	32					273	6		7	145
8	32					420	11		13	224

10	24					526	16		19	281
1/4	20	1551	62 in-lbs	72 in-lbs	827	955	38		45	509
5/16	18	2556	128	149	1363	1573	79		92	839
3/8	16	3778	19 ft-lbs	22 ft-lbs	2015	2325	12 ft-lbs	14 ft-lbs		1240
7/16	14	5183	30	35	2764	3189	19		22	1701
1/2	13	6918	46	54	3689	4257	28		33	2270
9/16	12	8870	67	78	4731	5458	41		48	2911
5/8	11	11018	92	107	5876	6780	57		66	3616
3/4	10	11288	113	132	6020	10034	100	117		5351
7/8	9	15584	182	212	8311	12121	141	165		6464
1	8	20444	273	318	10903	15901	212	247		8480
1 1/8	7	25761	386	451	13739	20036	301	351		10686
1 1/4	7	32708	545	636	17444	25439	424	495		13568
1 3/8	6	38977	715	834	20788	30316	556	648		16168
1 1/2	6	47427	949	1107	25295	36888	738	861		19674
Fine Thread Series
2	64					118	1.6 in-lbs	1.9	in-lbs	63
4	48					198	3.6		4.1	106
6	40					304	7		8	162
8	36					442	12		14	236

10	32					600	18		21	320
1/4	28	1773	71 in-lbs	83 in-lbs	946	1091	44		51	582
5/16	24	2831	142	165	1510	1742	87	102		929
3/8	24	4282	21 ft-lbs	25 ft-lbs	2284	2635	13 ft-lbs	15 ft-lbs		1405
7/16	20	5787	34	39	3087	3561	21		24	1899
1/2	20	7798	52	61	4159	4799	32		37	2559
9/16	18	9895	74	87	5277	6089	46		53	3248
5/8	18	12478	104	121	6655	7679	64		75	4095
3/4	16	12587	126	147	6713	11189	112	131		5967
7/8	14	17195	201	234	9171	133737	1560	182		7133
1	14	22946	306	357	12238	178470	2380	278		9518
1 1/8	12	28881	433	505	15403	224627	3369	393		11980
1 1/4	12	36212	604	704	19313	281648	4694	548		15021
1 3/8	12	44372	813	949	23665	345112	6327	738		18406
1 1/2	12	53360	1067	1245	28458	415019	8300	968		22134

These f593 Bolt Torque values are calculated from T=KDF formula, where
K = 0.16 for "lubricated" conditions and 0.35 for "dry"

Stainless F593 Washer Sizes

F593 Stainless USS Flat Washers
Size	ID	OD	Thickness
3/16	1/4"	9/16"	3/64"
1/4	5/16"	3/4"	1/16"
5/16	3/8"	7/8"	5/64"
3/8	7/16"	1"	5/64"
7/16	1/2"	1-1/4"	5/64"
1/2	9/16"	1-3/8"	7/64"
9/16	5/8"	1-1/2"	7/64"
5/8	11/16"	1-3/4"	9/64"
3/4	13/16"	2"	5/32"
7/8	15/16"	2-1/4"	1/64"
1	1-1/16"	2-1/2"	11/64"
1-1/8	1-1/4"	2-3/4"	11/64"
1-1/4	1-3/8"	3"	11/64"
1-3/8	1-1/2"	3-1/4"	3/16"
1-1/2	1-5/8"	3-1/2"	3/16"
1-5/8	1-3/4"	3-3/4"	3/16"
1-3/4	1-7/8"	4"	3/16"
2	2-1/8"	4-1/2"	3/16"
2-1/2	2-5/8"	4-1/2"	3/16"
3	3-1/8"	5-1/2"	9/32"

ASTM F593 18-8 Stainless Steel Bolts Sizes

ASME B18.2.1 F593 CW Stainless Hex Bolt size (Inch Series)

Size in Inch	F593 Stainless Hex Bolt Diameter [in]	Stainless Steel F593 Bolt Width Across Flats		F593 Stainless Steel Bolt Head Height
Size in Inch	F593 Stainless Hex Bolt Diameter [in]	Nominal [in]	Min. [in]	Nominal [in]	Min. [in]
1/4"	0.2500	7/16"(0.438)	0.425	11/64"	0.150
5/16"	0.3125	1/2"(0.500)	0.484	7/32"	0.195
3/8"	0.3750	9/16"(0.562)	0.544	1/4"	0.226
7/16"	0.4375	5/8"(0.625)	0.603	19/64"	0.272
1/2"	0.5000	3/4"(0.750)	0.725	11/32"	0.302
5/8"	0.6250	15/16"(0.938)	0.906	27/64"	0.378
3/4"	0.7500	1-1/8"(1.125)	1.088	1/2"	0.455
7/8"	0.8750	1-5/16"(1.312)	1.269	37/64"	0.531
1"	1.0000	1-1/2"(1.500)	1.450	43/64"	0.591
1-1/8"	1.1250	1-11/16"(1.688)	1.631	3/4"	0.658
1-1/4"	1.2500	1-7/8"(1.875)	1.812	27/32"	0.749
1-3/8"	1.3750	2-1/16"(2.062)	1.994	29/32"	0.810
1-1/2"	1.5000	2-1/4"(2.250)	2.175	1"	0.902
1-5/8"	1.6250	2-7/16"(2.438)	2.356	1-3/32"	0.978
1-3/4"	1.7500	2-5/8"(2.625)	2.538	1-5/32"	1.054
1-7/8"	1.8750	2-13/16"(2.812)	2.719	1-1/4"	1.130
2"	2.0000	3"(3.000)	2.900	1-11/32"	1.175

Chemical Composition of F593 Stainless Hex Bolts

	Alloy
Element Alloy	Group 1, Type 304	Group 2, Type 316
Carbon	0.08%	0.08%
Manganese	2.00%	2.00%
Phosphorus	0.045%	0.045%
Sulfur	0.030%	0.030%
Silicon	1.00%	1.00%
Chromium	18.0 to 20.0%	16.0 to 18.0%
Nickel	8.0 to 10.5%	10.0 to 14.0%
Copper	1.00%
Molybdenum		2.00 to 3.00%

Mechanical Properties of Stainless Steel F593 Nut Bolt

F593 Bolt Alloy Group	Condition	Marking on Bolt	Sizes	Tensile Strength, ksi	Yield Strength, ksi min	Rockwell Hardness
Group 1	AF	F593A	1/4 to 1-1/2	65 to 85	20	B85 max
	A	F593B	1/4 to 1-1/2	75 to 100	30	B65 to 95
	CW1	F593C	1/4 to 5/8	100 to 150	65	B95 to C32
	CW2	F593D	3/4 to 1-1/2	85 to 140	45	B80 to C32
Group 2	AF	F593E	1/4 to 1-1/2	65 to 85	20	B85 max
	A	F593F	1/4 to 1-1/2	75 to 100	30	B65 to 95
	CW1	F593G	1/4 to 5/8	100 to 150	65	B95 to C32
	CW2	F593H	3/4 to 1-1/2	85 to 140	45	B80 to C32

Specialized in

F593C Hex Bolts	F593 grade 630 Fasteners
ASTM F593 316 Stainless Steel Hex Head Screw	ASTM F593D Nuts
F593 18-8 Stainless Steel Stud Bolt	ASTM F593G Heavy Hex Bolt
ASTM F593D Flange Bolts	F593H Stud Bolt
F593 Stainless Steel Threaded Rod	ASTM F593 Fasteners & Hex Head Bolt with hex nuts and spring washer
ASTM F593C Bolt	SS ASTM F593 Lifting lug eye bolt
M3 M4 M5 ASTM F593 CW Stainless Heavy Hex Bolts	ASTM F593 L Type Metal Anchor Bolt
ASTM F593G Socket Head Cap Screws	Stainless ASTM F593 embedded bolt
F593H Csk Allen Bolt	ASTM F593 stainless U bolt, nut and washers
ASTM F593 Threaded Rod

F593 Stainless Steel Fasteners Hardware Selection

Nuts	Washers
ASTM F594	SS 304 Washer
ASTM F594	316 Washer

F593 Bolts Price List

Products	FOB Price US $
ASTM F593 Stainless Steel U bolt, nut and washers	US$ 1.50-US$ 2.00 / Piece
ASTM F593 Hex Head Bolt with hex nuts and spring washer	US$ 1.50-US$ 2.00 / Piece
ASTM F593 Stainless steel oval neck track bolts	US$ 0.10-US$ 2.00 / Piece
ASTM F593 Stainless steel Fasteners	US$ 0.15-US$ 0.50 / Pieces
ASTM F593 L Type Anchor Bolt	US$ 0.10-US$ 1.20 / Piece
High Tensile astm f593b f593a f593c Hex Bolt	US $0.01-$0.10 / Piece / Piece
ASTM F593 Lifting lug eye bolt	US$ 0.01-US$ 0.50 / Piece
M5 M6 M10 ASTM F593 bolt	US$ 0.01 / Pieces
ASME / ASTM F593 embedded bolt	US$ 0.10-US$ 1.20 / Piece

Call us or send us an email to sales@jigneshsteel.com for more details. Always compare our price with other ASTM F593 Bolts manufacturers in India or China

45, Islampura Street, Near Alankar Cinema, Mumbai-400 004 (India)
+(91) 022-66595844, 66595845
Mon - Saturday: 9.00am to 7.00pm
sales@jigneshsteel.com
jignesh@jigneshsteel.com