ASME SA 193 B6 covers threaded rods, external threaded fasteners, stud bolts and other high tensile stainless steel bolts. The specification covers 110ksi minimum tensile strength AISI 410 stainless steel material made bolts.
The A193 B6 Studs are forged in production, machined and heat treated for maximum strength and hardness. The chemical composition of the bolts includes carbon, manganese, phosphorus, sulfur, silicon and 11.5% chromium in it. The ASTM A193 B6 Stud Bolts have a minimum yield strength of 585MPa and a minimum tensile strength of 760MPa with 15% elongation rate. They are quenched and tempered at 593 degrees Celsius minimum temperature. The size of the ASTM A193 B6 Bolts ranges from M02 to M160 and the length ranges from 3mm to 200mm. The material has very good corrosion resistance and temperature resistance. There are different types of bolts such as hex head, square head and others which are useful in different application circumstances. The applications include oil and gas, petrochemical, petroleum, pharmaceutical, marine, engineering and many other applications.
The ASTM A193 gr b6 is suitable for petrochemical applications due to its lower elongation, high strength, and high heat tolerance. The petrochemical applications often operate under high temperatures with high pressure inside the pipelines. The high strength and heat resistance of the bolts make sure that the fittings are in place and not compromised with the fluctuation mechanical properties of the application they are fitted onto.
Jignesh Steel is a leading manufacturer and supplier of the different types of the ASTM A193 Gr. B6 Bolts, SA 193 B6 Stud Bolt, Threaded Rod, Hex Bolt, Anchor Bolts, Studs, Socket Head Cap Screws, Countersunk Screws, Square Head Bolts and other A193 Grade B6 Threaded Fasteners with different standards. In addition, we provide these A193 Grade B6 Stainless Steel Stud Bolt and Nut for use in water equipment, power generation plants, aircraft exhaust manifolds, gas processing, specialty chemicals, off shore oil drilling, heat exchangers and in burner pipe applications. Please feel free to contact us for more information on the different types of the ASTM A193 grade B6 bolts and their prices.
SA 193 B6 Fasteners
ASTM A193 Grade B6 Bolts
SA 193 Grade B6 Threaded Rod and Studs
ASTM A193 gr b6 Hex Bolt
A193 Gr b6 Stud Bolt
ASTM A193 B6 Nuts
Material | Price in India |
---|---|
ASTM A193 B6 Stud Bolts, 5/8 X 2-1/2 UNC | INR 28/Pcs |
A193 B6 Hex Bolt, 5/8 X 50MM, Fully Threaded, PTFE Coated | INR 360/Pcs |
Call us or send us an email to sales@jigneshsteel.com for more price list.
SA 193 B6 Bolts | ANSI B18.2.1, DIN 931/ 933 |
ASTM A193 Grade B6 Hex Bolts Size Metric |
|
SA 193 Grade B6 Hex Bolts Size Inch |
|
ASTM A193 gr b6 Eye Bolts Metric Size |
|
A193 Gr b6 Stud Bolt Metric Size |
|
ASTM A193 B6 Stud Bolt Inch |
|
ASME SA 193 B6 Hex Nut (DIA) |
|
A193 Grade B6 Plain Washer (DIA) |
|
ASME SA 193 Grade B6 Bolts Standard Sizes | M10, M4, M16, M36 M2.5, M6, M30, M12, M8, M14, M2, M3, M20, M24, M5 to M160 |
ASTM A193 Grade B6 Bolts International Standard | IS, ANSI, ASTM DIN, ISO, JIS, GB, ASME, BS, UNI |
A193 B6 Fasteners Threads | BSF, UNF METRIC, UNC, UNEF, BSW or as required |
DIN German Standard ASTM A193 Grade B6 Bolts | DIN 933, 931, 970, 934 |
SA 193 Gr B6 Fasteners Production Process |
|
ISO Standard ASTM A193 B6 Stainless Steel Bolts | ISO 4033, : ISO 4032, JIS standards |
A193 B6 Stainless Steel Bolts / Screws Head Drive | Phillips, Slotted, Phillips/Slot, Six-Lobe |
MTC (Manufacturer Test Certificate) | EN 10204 / 3.1 |
ASME SA 193 Gr B6 Nut Bolt Finishing |
|
ASME/ ANSI - American Standard ASTM A193 Grade B6 Bolts |
|
ASTM A193 Grade B6 Bolts Coating |
|
ASTM A193 Grade B6 Stainless Steel Fasteners Packing | Wooden Pallet, Canton, Carton / Small Box or as required |
SA 193 B6 Flange Bolts
ASTM A193 Grade B6 Heavy Hex Bolts
SA 193 Grade B6 Hex Bolts
ASTM A193 gr b6 Square Bolts
A193 Gr b6 U Bolts
ASTM A193 B6 Eye Bolts
SA 193 B6 Lag Bolts
ASTM A193 Grade B6 Anchor Bolts
SA 193 Grade B6 Hex Head Bolts
ASTM A193 gr b6 Carriage Bolts
A193 Gr b6 Allen Cap Bolt
ASTM A193 B6 Countersunk Bolts
SA 193 B6 Eye Nuts
ASTM A193 Grade B6 Heavy Hex Nuts
SA 193 Grade B6 Hex Nuts
ASTM A193 gr b6 Jam Nuts
A193 Gr b6 Lock Nuts
ASTM A193 B6 Panel Nuts
ASME SA 193 B6 Square Nuts
A193 Grade B6 T-Nuts For Wood
ASME SA 193 Grade B6 Wheel Nuts and Caps
A193 B6 Wing Nuts
ASTM A193 B6 Stainless Steel Cage Nuts and Spring Nuts
A193 B6 Stainless Steel Self Locking Nuts
ASME SA 193 Gr B6 Tek Screws
SA 193 Gr B6 Deck Screws
ASTM A193 Grade B6 Stainless Steel Concrete Screws
A193 Grade B6 Stainless Steel Socket Head Cap Screw
SA 193 B6 Eye Screw
ASTM A193 Grade B6 Thumb Screw
SA 193 Grade B6 Wood Screw
ASTM A193 gr b6 Coach Screw
A193 Gr b6 Hex Head Lag Screw
ASTM A193 B6 12-Point Flange Head Cap Screws
ASME SA 193 B6 Wing Screw
A193 Grade B6 Captive Panel Screws
ASME SA 193 Grade B6 Hex Cap Screw
A193 B6 Allen Cap Screw
ASTM A193 B6 Stainless Steel Grub Screw
A193 B6 Stainless Steel Fully Threaded Screw
ASME SA 193 Gr B6 Torx Screw
SA 193 Gr B6 Pan Head Screw
ASTM A193 Grade B6 Stainless Steel Truss Head Screw
A193 Grade B6 Stainless Steel Flat Head Screw
SA 193 B6 Stud Bolts
ASTM A193 Grade B6 Double Ended Studs
SA 193 Grade B6 Tie Rod
ASTM A193 gr b6 Fully Threaded Studs
A193 Gr b6 Threaded Rod
ASTM A193 B6 Unc Stud Bolt
SA 193 B6 Cup Washer
ASTM A193 Grade B6 Square Washer
SA 193 Grade B6 Lock Washer
ASTM A193 gr b6 Countersunk Washer
A193 Gr b6 Belleville Washer
ASTM A193 B6 Shim Washer
ASME SA 193 B6 Square Plate Washer
A193 Grade B6 Square Washer
ASME SA 193 Grade B6 Penny Washer
A193 B6 Machine Washers
Polished ASTM A193 B6 Stainless Steel Washer
A193 B6 Stainless Steel Ring Washers
ISO to DIN
DIN | ISO → (DIN ISO) |
EN (DIN EN) | Range of dimensions1 | Changes 2 |
---|---|---|---|---|
558 931 933 |
4018 4014 4017 |
24018 24014 24017 |
Ø M 10, 12, 14, 22 | New ISO widths across flats |
960 961 |
8765 8676 |
28765 28676 |
All other Ø | None = DIN and ISO are identical |
601 with 555 nuts |
4016 with 4034 nuts |
24016 24034 |
Ø M 10, 12, 14, 22 | Bolts: new ISO widths across flats Nuts: new ISO WAF + ISO heights |
28030 | 4014 | 24014 | Other Ø up to M 39 | Bolts: none = DIN and ISO are identical Nuts: new ISO heights |
with 555 nuts | with 4032 nuts |
24032 | Other Ø above M 39 | None = DIN and ISO are identical |
561 | - | - | Ø M 12, 16 | New ISO widths across flats |
564 | - | - | All other Ø | None |
609 | - | - | Ø M 10, 12, 14, 22 | New ISO widths across flats |
610 | - | - | All other Ø | None |
7968 nuts 7990 nuts |
Screws: - Nuts acc. to |
- 24034 |
M 12, 22 | Bolts : new ISO widths across flats Nuts: new ISO WAF + ISO heights |
ISO 4034 | All other Ø | Bolts : none Nuts: new ISO heights |
||
186/261 525 603 604 |
Screws: - Nuts acc. to ISO 4034 |
24034 | Ø M 10, 12, 14, 22 | Bolts : none Nuts: new ISO WAF + ISO heights |
605 | All other Ø | Bolts : none | ||
607 | Nuts: new ISO heights | |||
608 | ||||
7969 | ||||
11014 | ||||
439 T1 (A=out bevel) 439 Tz |
4036 4035 |
24036 24035 |
Ø M 10, 12, 14, 22 | New ISO widths across flats (no change in height) |
(B=with evel) | = standard thread 8675 = fine thread |
28675 | All other Ø | None = DIN and ISO are identical (no change in height) |
555 | 4034 | 24034 | Ø M 10, 12, 14, 22 | New ISO WAF + new ISO heights |
(ISO type 1) | ||||
934 | 4032 | 24032 | ||
= standard | ||||
Rd. 6, 8, 10 | thread | |||
(ISO type 1) | ||||
Other Ø up to M 39 | New ISO heights | |||
Strength class : 12 | 4033 | 24033 | (no change to WAF) | |
= standard | ||||
thread | ||||
(ISO type 2) | ||||
Strength class is 6, 8, 10 |
= fine thread (ISO Type 1) |
28673 | Ø above M 39 | None, DIN and ISO are identical |
Diameter | Yield strength loads for shoulder studs as per DIN EN ISO 3506 | ||||||||
---|---|---|---|---|---|---|---|---|---|
M 5 | 2980 | 6390 | |||||||
M 6 | 4220 | 9045 | |||||||
M 8 | 7685 | 16470 | |||||||
M 10 | 12180 | 26100 | |||||||
M 12 | 17700 | 37935 | |||||||
M 16 | 32970 | 70650 | |||||||
M 20 | 51450 | 110250 | |||||||
M 24 | 74130 | 88250 | |||||||
M 27 | 96390 | 114750 | |||||||
M 30 | 117810 | 140250 |
(one-to-one comparison)
DIN | ISO | DIN | ISO | DIN | ISO |
---|---|---|---|---|---|
1 | 2339 | 916 | 4029 | 1481 | 8752 |
7 | 2338 | 931 | 4014 | 6325 | 8734 |
84 | 1207 | 933 | 4017 | 6914 | 7412 |
85 | 1508 | 934 | 4032 | 6915 | 7414 |
94 | 1234 | 934 | 8673 | 6916 | 7416 |
125 | 7089 | 937 | 7038 | 6921 | 8102 |
125 | 7090 | 960 | 8765 | 6923 | 4161 |
126 | 7091 | 961 | 8676 | 6924 | 7040 |
417 | 7435 | 963 | 2009 | 6925 | 7042 |
427 | 2342 | 964 | 2010 | 7343 | 8750 |
433 | 7092 | 965 | 7046 | 7343 | 8751 |
438 | 7436 | 966 | 7047 | 7344 | 8748 |
439 | 4035 | 971-1 | 8673 | 7346 | 8749 |
439 | 4036 | 971-2 | 8674 | 7971 | 1481 |
440 | 7094 | 980 | 7042 | 7972 | 1482 |
551 | 4766 | 980 | 10513 | 7973 | 1483 |
553 | 7434 | 982 | 7040 | 7976 | 1479 |
555 | 4034 | 982 | 10512 | 7977 | 8736 |
558 | 4018 | 985 | 10511 | 7978 | 8737 |
580 | 3266 | 1434 | 2341 | 7979 | 8733 |
601 | 4016 | 1440 | 8738 | 7979 | 8735 |
603 | 8677 | 1444 | 2341 | 7981 | 7049 |
660 | 1051 | 1471 | 8744 | 7982 | 7050 |
661 | 1051 | 1472 | 8745 | 7983 | 7051 |
911 | 2936 | 1473 | 8740 | 7985 | 7045 |
912 | 4762 | 1474 | 8741 | 7991 | 10462 |
913 | 4026 | 1475 | 8742 | 9021 | 7093 |
914 | 4027 | 1476 | 8746 | 11024 | 7072 |
915 | 4028 | 1477 | 8747 |
(one-to-one comparison)
ISO | DIN | ISO | DIN | ISO | DIN |
---|---|---|---|---|---|
1051 | 660/661 | 4036 | 439 | 8673 | 934 |
1207 | 84 | 4161 | 6923 | 8673 | 971 |
1234 | 94 | 4762 | 912 | 8673 | 971-1 |
1479 | 7976 | 4766 | 551 | 8674 | 971-2 |
1481 | 7971 | 7038 | 937 | 8676 | 961 |
1482 | 7972 | 7040 | 982 | 8677 | 603 |
1483 | 7973 | 7040 | 6924 | 8733 | 7979 |
1580 | 85 | 7042 | 980 | 8734 | 6325 |
2009 | 963 | 7042 | 6925 | 8735 | 7979 |
2010 | 964 | 7045 | 7985 | 8736 | 7977 |
2338 | 7 | 7046 | 965 | 8737 | 7978 |
2339 | 1 | 7047 | 966 | 8738 | 1440 |
2341 | 1434 | 7049 | 7981 | 8740 | 1473 |
2341 | 1444 | 7050 | 7982 | 8741 | 1474 |
2342 | 427 | 7051 | 7983 | 8742 | 1475 |
2936 | 911 | 7072 | 11024 | 8744 | 1471 |
3266 | 580 | 7089 | 125 | 8745 | 1472 |
4014 | 931 | 7090 | 125 | 8746 | 1476 |
4016 | 601 | 7091 | 126 | 8747 | 1477 |
4017 | 933 | 7092 | 433 | 8748 | 7344 |
4018 | 558 | 7093 | 9021 | 8749 | 7346 |
4026 | 913 | 7094 | 440 | 8750 | 7343 |
4027 | 914 | 7412 | 6914 | 8751 | 7343 |
4028 | 915 | 7414 | 6915 | 8752 | 1481 |
4029 | 916 | 7416 | 6916 | 8765 | 960 |
4032 | 934 | 7434 | 553 | 10462 | 7991 |
4032 | 932 | 7435 | 417 | 10511 | 985 |
4034 | 555 | 7436 | 438 | 10512 | 982 |
4035 | 439 | 8102 | 6921 | 10513 | 980 |
LENGTH \DIA | M1.6 | M2 | M2.5 | M3 | M4 | M5 | M6 | M8 | M10 | M12 | M16 | M20 | M24 |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
2 | 0.0019 | 0.0029 | |||||||||||
2.5 | 0.0025 | 0.0037 | 0.0063 | ||||||||||
3 | 0.0029 | 0.0044 | 0.0075 | 0.010 | |||||||||
4 | 0.0037 | 0.0059 | 0.0100 | 0.014 | 0.023 | ||||||||
5 | 0.0046 | 0.0074 | 0.0125 | 0.018 | 0.0305 | 0.042 | |||||||
6 | 0.0054 | 0.0089 | 0.0150 | 0.022 | 0.038 | 0.054 | 0.074 | ||||||
8 | 0.0070 | 0.0119 | 0.0199 | 0.030 | 0.053 | 0.078 | 0.109 | 0.188 | |||||
10 | 0.0148 | 0.0249 | 0.038 | 0.068 | 0.102 | 0.144 | 0.251 | 0.372 | |||||
12 | 0.0299 | 0.046 | 0.083 | 0.126 | 0.179 | 0.314 | 0.473 | 0.67 | |||||
16 | 0.062 | 0.113 | 0.174 | 0.249 | 0.440 | 0.673 | 0.95 | 1.57 | |||||
20 | 0.140 | 0.222 | 0.319 | 0.566 | 0.872 | 1.23 | 2.09 | 3.13 | |||||
25 | 0.282 | 0.407 | 0.724 | 1.120 | 1.58 | 2.74 | 4.14 | 5.52 | |||||
30 | 0.494 | 0.881 | 1.370 | 1.93 | 3.39 | 5.17 | 7.03 | ||||||
35 | 1.040 | 1.620 | 2.27 | 4.04 | 6.20 | 8.53 | |||||||
40 | 1.200 | 1.870 | 2.62 | 4.69 | 7.23 | 10.00 | |||||||
45 | 2.120 | 2.97 | 5.33 | 8.26 | 11.50 | ||||||||
50 | 2.360 | 3.32 | 5.98 | 9.26 | 13.00 | ||||||||
55 | 3.66 | 6.63 | 10.30 | 14.50 | |||||||||
60 | 4.01 | 7.28 | 11.40 | 16.00 |
Hardness, Rockwell B at 1200°F | 98 | 98 | Hardened+Tempered |
Hardness, Rockwell C at 1000°F | 35 | 35 | Hardened+Tempered |
Tensile Stress, Ultimate (Hardened 1800°F, Tempered 1000°F) | 1063 MPa | 154000 psi | |
Tensile Stress, Yield (Hardened 1800°F, Tempered 550°F) | 1022 MPa | 148000 psi | |
Elongation at Break | 34 % | 34 % | Annealed |
Grade | Material | ASTM A193 Grade B6 Bolts& Nuts Chemical Composition (% maxima unless stated) | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
C | Si | Mn | P | S | Cr | Mo | Ni | Cu | ||||||
C1 | ASTM A193 Grade B6 | 0.09-0.15 | 1.0 | 1.0 | 0.05 | 0.03 | 11,5 - 14,0 | - | 1 | - |
Type | Tensile Strength | Yield Strength (0.2% offset) | Elongation in 2” (50.80mm) % | Hardness (Rockwell) | ||
---|---|---|---|---|---|---|
Ksi | MPa | Ksi | MPa | |||
A193 Gr. B6 | 70 | 483 | 45 | 310 | 25 | B80 |
TYPE | DESCRIPTION | FULL SIZE BOLTS, STUDS & SCREWS | MACHINED TEST SPECIMENS OF BOLTS, STUDS & SCREWS | NUTS | |||||
---|---|---|---|---|---|---|---|---|---|
YIELD2 STRENGTH min ksi | TENSILE STRENGTH min ksi | YIELD2 STRENGTH min ksi | TENSILE STRENGTH min ksi | ELONGATION3 % Min | HARDNESS ROCKWELL Min | PROOF LOAD STRESS ksi | HARDNESS ROCKWELL Min | ||
A193 Gr b6 | Martensitic Hardened and Tempered | 95 | 125 | 95 | 125 | 20 | C22 | 125 | C22 |
AISI | UNS | ASTM |
---|---|---|
410 Stainless Steel Bolts | UNS 41000 | ASTM A193 GRADE B6 |