6061 Aluminum Bolts, Screws, Threaded Rod and Nuts supplier in Mumbai
Aluminum Fasteners are hardware device that mechanically joints or attaches two or more things together. It has low density at about one third that of steel fasteners. It has an exceptional empathy against oxygen and when exposed to air it forms a protective layer of oxide on the surface. Aluminum Bolts is usually utilized to hold objects or materials together, or to position objects. It is the second-most material utilized by automakers; it protects from hazards on the road. Aluminum Rivets ideal for tensile loads and supporting shear, as well as watertight applications. It has high-strength can handle some of the harshest conditions.
Aluminum Screws has a threaded surface and a point on one end and a slotted head is twisted to penetrate and fasten two objects together. It can increase its strength and formability by including magnesium, silicon and copper. Aluminum Threaded Rod is a rod which is threaded from end to end. It is one of the most adaptable products which are available for fastening objects together. It can be strengthened through the process of hot rolling or cold rolling. Aluminum Bolts and Nuts is a type of fastener which is always used together. The bolt is used with the nut and it is a solid cylindrical fastener. The nuts has circular cross section and with hollow circular cylinders.
Anodized Screws is a special type of fastener where the natural oxidation on the surface can be enhanced for a variety of reasons. It can be treated in this manner for color coding them such as in their use in surgery in the medical field, and to offer an increased level of corrosion and wear resistance. Aluminum Wood Screws is usually available with flat, pan or oval-heads. It usually has partial unthreaded shank below the head. It has thermal conductivity which is about one-half that of copper wood screw and its electrical conductivity, about two-thirds.
Aluminum Hex Bolts hexagonal head and are driven with a wrench. Its machine threads is used with a nut or in a tapped hole. 6061 Aluminum Bolts offers good finishing characteristics and responds well to anodizing, including clear, hard coating, clear and color dye. It can be easily welded and joined. It is structurally stronger and more durable. 2024-T4 Aluminum Bolts has high-strength which is suitable for projects which requires excellent fatigue resistance and high strength to weight ratio.
Aluminum Fasteners
Aluminum Nuts
Aluminum Bolts
Aluminum Hex Bolts
Aluminum Stud Bolts
Aluminum Threaded Rod
Buy directly from Aluminum Hex Bolts manufacturers in India, largest range and quick delivery of 2024-T4 Aluminum Wood/ Machine Screws
Table of contents
Aluminum Fasteners Specifications
Buy M1.4 to M30 Metric size precision Anodized Aluminum Screws at factory price in Mumbai, Aluminum Pop Rivets manufacturer in India
| Aluminum Fasteners Sizes |
Manufacturing M2, M3, M3.5, M4, M5, M6, M8, M10, M12, M14, M16, M18, M20, M22, M24, M27, M30, M33, M36, M42, M45, M48 to M160 and Custom Metric Aluminum Fasteners |
| 6061-T6 Aluminum Bolts Size Metric |
|
| Aluminum Hex Bolts Size Inch |
|
| 6262-T9 Bolts & Screws US Threads | METRIC, BSW, BSF, Unified national coarse (UNC), Unified national fine (UNF), Unified national extra fine (UNEF), UNJC and UNJF threads, UNK threads, UNR threads, Constant-pitch threads |
| Standard | Manufacturer of Aluminum Fasteners as per IS, ANSI, ASTM, DIN, ISO, JIS, GB, ASME, BS, UNI, CSN, EU, IFI, PN, and all International Standards
|
| Aluminum Fasteners Length | 3 mm to 200 mm |
| Aluminum Fasteners UTS - Unified Thread Standard | UNC, UNF, NPT, UNS, UNEF, NPTF |
| Aluminum Bolts Head drive | Phillips/Slot, Phillips, Slotted, Six-Lobe, etc |
| Material Origin | Aluminum Fasteners are Western European. Eastern origin possible on request. |
| Other Aluminum Fasteners manufacturers | Omni, APL, Kundan, Deepak Fasteners, Unbrako, Sundaram Precision, Infasco, Caparo, EBY Fastener, SPAX® Screws, GKW Etc. |
| 2024 - T4 Fasteners types | Eye Bolt, Hexagon Nut, Studs, Cap Screw, Structural Bolts, Allen Cap screw, Foundation Bolts, Anchor Bolt, Hex Head Bolts, Screw, T-Head Bolts, Hex Coupling Nut, Nuts, Stud Bolts, Marine Anchors, Screws, Wing Screw, U Bolts, Wing Screw, Hex Nut, Square Nut, Machine Screw, Nut, Socket Screw, Mushroom Head Square Neck Bolts, Washers, J Bolts, Socket Hexagon Head Screw, Hex Domed Cap Nuts, Sockets, Hex Set Screw, Bolts, Anchors, Spring Washers, Socket Head Cap Screw, Pan Head Screw, Studs |
| Aluminum Nut Bolt Surface Finish & Coating | Sherardized, Stainless Steel Passivated, Zinc, Anodizing, Hot Dip Galvanised (HDG), black oxide, Dacroment, Self-Colour, Nickel plated, Bright Zinc Plated (BZP), Plated zinc-nickel, Geometry |
| Why Jignesh Steel? |
|
| MOQ | 5 pieces |
| Preferred Aluminum Nut Bolt Drawing Formats | JPEG, PDF, CAD, STP, IGS |
| Ask for Test Certificates from Aluminum Fasteners manufacturers |
|
| Free Samples | Yes |
| Delivery time | Regular product is about 7-15 days |
| Payment Terms | T/T, Western Union, Paypal, L/C or Trade Assurance 30% deposit & balance before shipping |
| Port of Dispatch | Mumbai or Kalamboli ports in Maharashtra state of India |
| 6262-T9 Fasteners Application and Uses | Industrial, Wind tower, Railway, Nuclear power, Construction, Electronic, and Automotive industry |
| ISO - International Organization for Standardization |
Aluminum Hex Bolts Dimensions
6061-T6 Aluminum Finished Hex Nuts Dimensions
2024 - T4 Metric Nut Dimensions Chart in mm
2024 - T4 Flat Washer Dimensions
ISO 7089 Aluminum Flat Washer dimensions (all units in mm)
| For Screw Nominal Size |
Hole Diameter | Outside Diameter (OD) | 6061-T6 Aluminum Washer Thickness |
|---|---|---|---|
| M1.6 | 1.7 | 4 | 0.3 |
| M2 | 2.2 | 5 | 0.3 |
| M2.5 | 2.7 | 6 | 0.5 |
| M2.6 | 2.8 | 7 | 0.5 |
| M3 | 3.2 | 7 | 0.5 |
| M3.5 | 3.7 | 8 | 0.5 |
| M4 | 4.3 | 9 | 0.8 |
| M5 | 5.3 | 10 | 1 |
| M6 | 6.4 | 12 | 1.6 |
| M7 | 7.4 | 14 | 1.6 |
| M8 | 8.4 | 16 | 1.6 |
| M10 | 10.5 | 20 | 2 |
| M12 | 13 | 24 | 2.5 |
| M14 | 15 | 28 | 2.5 |
| M16 | 17 | 30 | 3 |
| M18 | 19 | 34 | 3 |
| M20 | 21 | 37 | 3 |
| M22 | 23 | 39 | 3 |
| M24 | 25 | 44 | 4 |
| M27 | 28 | 50 | 4 |
| M30 | 31 | 56 | 4 |
| M33 | 34 | 60 | 5 |
| M36 | 37 | 66 | 5 |
| M39 | 40 | 72 | 6 |
| M42 | 43 | 78 | 7 |
| M45 | 46 | 85 | 7 |
| M48 | 50 | 92 | 8 |
| M52 | 54 | 98 | 8 |
| M56 | 58 | 105 | 9 |
6262-T9 Socket Head Cap Screw Dimensions
American National Standard ANSI/ASME B18.3.1M Aluminum Socket Head Cap Screws
| 6061-T6 Aluminum Screw Nom. Size Thread Pitch | Body Diameter D |
Head Diameter A |
Head Height H |
Chamfer or Radius S |
Hexagon Socket Size J |
Spline Socket Sizea M |
Key Engagement T |
Transition Dia. B |
|||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Max | Min | Max | Min | Max | Min | Max | Nom. | Nom. | Min | Max | |
| M1.6 × 0.35 | 1.60 | 1.46 | 3.00 | 2.87 | 1.60 | 1.52 | 0.16 | 1.5 | 1.829 | 0.80 | 2.0 |
| M2 × 0.4 | 2.00 | 1.86 | 3.80 | 3.65 | 2.00 | 1.91 | 0.20 | 1.5 | 1.829 | 1.00 | 2.6 |
| M2.5 × 0.45 | 2.50 | 2.36 | 4.50 | 4.33 | 2.50 | 2.40 | 0.25 | 2.0 | 2.438 | 1.25 | 3.1 |
| M3 × 0.5 | 3.00 | 2.86 | 5.50 | 5.32 | 3.00 | 2.89 | 0.30 | 2.5 | 2.819 | 1.50 | 3.6 |
| M4 × 0.7 | 4.00 | 3.82 | 7.00 | 6.80 | 4.00 | 3.88 | 0.40 | 3.0 | 3.378 | 2.00 | 4.7 |
| M5 × 0.8 | 5.00 | 4.82 | 8.50 | 8.27 | 5.00 | 4.86 | 0.50 | 4.0 | 4.648 | 2.50 | 5.7 |
| M6 × 1 | 6.00 | 5.82 | 10.00 | 9.74 | 6.00 | 5.85 | 0.60 | 5.0 | 5.486 | 3.00 | 6.8 |
| M8 × 1.25 | 8.00 | 7.78 | 13.00 | 12.70 | 8.00 | 7.83 | 0.80 | 6.0 | 7.391 | 4.00 | 9.2 |
| M10 × 1.5 | 10.00 | 9.78 | 16.00 | 15.67 | 10.00 | 9.81 | 1.00 | 8.0 | … | 5.00 | 11.2 |
| M12 × 1.75 | 12.00 | 11.73 | 18.00 | 17.63 | 12.00 | 11.79 | 1.20 | 10.0 | … | 6.00 | 14.2 |
| M14 × 2b | 14.00 | 13.73 | 21.00 | 20.60 | 14.00 | 13.77 | 1.40 | 12.0 | … | 7.00 | 16.2 |
| M16 × 2 | 16.00 | 15.73 | 24.00 | 23.58 | 16.00 | 15.76 | 1.60 | 14.0 | … | 8.00 | 18.2 |
| M20 × 2.5 | 20.00 | 19.67 | 30.00 | 29.53 | 20.00 | 19.73 | 2.00 | 17.0 | … | 10.00 | 22.4 |
| M24 × 3 | 24.00 | 23.67 | 36.00 | 35.48 | 24.00 | 23.70 | 2.40 | 19.0 | … | 12.00 | 26.4 |
| M30 × 3.5 | 30.00 | 29.67 | 45.00 | 44.42 | 30.00 | 29.67 | 3.00 | 22.0 | … | 15.00 | 33.4 |
| M36 × 4 | 36.00 | 35.61 | 54.00 | 53.37 | 36.00 | 35.64 | 3.60 | 27.0 | … | 18.00 | 39.4 |
| M42 × 4.5 | 42.00 | 41.61 | 63.00 | 62.31 | 42.00 | 41.61 | 4.20 | 32.0 | … | 21.00 | 45.6 |
| M48 × 5 | 48.00 | 47.61 | 72.00 | 71.27 | 48.00 | 47.58 | 4.80 | 36.0 | … | 24.00 | 52.6 |
Aluminum Bolts Type
2024 - T4 Square Bolts
6061-T6 Aluminum Hex Bolts
6262-T9 Heavy Hex Bolts
7075-T73 U Bolts
Aluminum 7075 Eye Bolts
6262-T9 Anchor Bolts
2024 - T4 Carriage Bolts
Aluminum Lag Bolts
6061-T6 Aluminum Hex Head Bolts
Aluminum Flange Bolts
7075-T73 Allen Cap Bolt
Aluminum 7075 Countersunk Bolts
Aluminum Nuts Types
7075-T73 Lock Nuts
Aluminum 7075 Panel Nuts
6061-T6 Aluminum Square Nuts
2024 - T4 T-Nuts For Wood
Aluminum Eye Nuts
6262-T9 Heavy Hex Nuts
6061-T6 Aluminum Hex Nuts
2024 - T4 Jam Nuts
6262-T9 Wheel Nuts and Caps
7075-T73 Wing Nuts
Aluminum 7075 Cage Nuts and Spring Nuts
2024 T4 Aluminum Self Locking Nuts
Aluminum Stud Bolt Type
Aluminum Stud Bolts
6262-T9 Double Ended Studs
6061-T6 Aluminum Tie Rod
2024 - T4 Fully Threaded Studs
7075-T73 Threaded Rod
Aluminum 7075 Unc Stud Bolt
Aluminum Screws Types
Aluminum 6262 Tek Screws
2024 T4 Aluminum Deck Screws
Aluminum 6262 Concrete Screws
Aluminum Socket Head Cap Screw
Aluminum Eye Screw
6262-T9 Thumb Screw
6061-T6 Aluminum Wood Screw
2024 - T4 Coach Screw
7075-T73 Hex Head Lag Screw
Aluminum 7075 12-Point Flange Head Cap Screws
6061-T6 Aluminum Wing Screw
2024 - T4 Captive Panel Screws
6262-T9 Hex Cap Screw
7075-T73 Allen Cap Screw
Aluminum 7075 Grub Screw
2024 T4 Aluminum Fully Threaded Screw
Aluminum 6262 Torx Screw
2024 T4 Aluminum Pan Head Screw
Aluminum 6262 Truss Head Screw
Aluminum Flat Head Screw
Aluminum Washers Types
Aluminum Cup Washer
6262-T9 Square Washer
6061-T6 Aluminum Lock Washer
2024 - T4 Countersunk Washer
7075-T73 Belleville Washer
Aluminum 7075 Shim Washer
6061-T6 Aluminum Square Plate Washer
2024 - T4 Square Washer
6262-T9 Penny Washer
7075-T73 Machine Washers
Polished Aluminum 7075 Washer
2024 T4 Aluminum Ring Washers
Aluminum Fasteners Application
- Nuclear Energy Sector
- Defence Industry
- Sea Water Equipment
- Offshore & Chemical Industry
- Electrical & Agriculture Industry
- Engineering & Aerospace Industry
- Aluminum Stud Bolt for Construction
- High quality Aluminum Petrochemical Fasteners
- High Strength Aluminum Bolts and Nuts for Automotive industry
- Large size Aluminum Bolts for Oil & Gas Industries
- Metric Aluminum Hex Bolts for Power Generation
- Aluminum Nut Bolt suitable for Off-Shore Oil Drilling
- Heavy duty Aluminum Fasteners for Heat Exchangers
Aluminum Bolts Testing Tool & Equipment
- Coordinate Measuring Machine
- Image measuring instrument
- Routine inspection of calipers
- Roughness tester used to test the surface finish of a Aluminum Bolts and Nuts
- Micrometer for accurate measurement of Aluminum Fasteners
- Thread gauge and Smooth plug gauge used to check Aluminum Screws and Nuts quickly
6061-T6 Aluminum Nuts Sizes
6262-T9 UNC Heavy Hex Nuts sizes as per ANSI/ASME B18.2.2
| UNC Aluminum Heavy hex nut dimensions | ||||||
|---|---|---|---|---|---|---|
| Nut N/B | Maximum Across Corners | Min Across Corners | Maximum Thickness | Min Thickness | Maximum Across Flats | Maximum Across Flats |
| 3/8 | 20.2 | 19.4 | 9.6 | 8.7 | 17.5 | 17 |
| 7/16 | 22 | 21.1 | 11.2 | 10.2 | 19 | 18.5 |
| 1/2 | 25.6 | 24.6 | 12.8 | 11.8 | 22.2 | 21.6 |
| 9/16 | 27.5 | 26.3 | 14.4 | 13.4 | 23.8 | 23.1 |
| 5/8 | 31.2 | 29.8 | 16 | 14.9 | 27 | 26.2 |
| 3/4 | 36.7 | 35.1 | 19.3 | 18 | 31.8 | 30.8 |
| 7/8 | 42.2 | 40.4 | 22.5 | 21.2 | 36.5 | 35.4 |
| 1 | 47.7 | 45.6 | 25.7 | 24.3 | 41.3 | 40 |
| 1 1/8 | 53.2 | 50.8 | 28.9 | 27.4 | 46 | 44.6 |
| 1 1/4 | 58.6 | 56.1 | 31.8 | 30.1 | 50.8 | 49.2 |
| 1 3/8 | 64.2 | 61.4 | 35 | 33.3 | 55.6 | 53.8 |
| 1 1/2 | 69.6 | 66.6 | 38.2 | 36.4 | 60.3 | 58.4 |
| 1 5/8 | 75.2 | 71.8 | 41.5 | 39.5 | 65.1 | 63 |
| 1 3/4 | 80.6 | 77.1 | 44.7 | 42.6 | 69.9 | 67.6 |
| 1 7/8 | 86.2 | 82.3 | 47.9 | 45.8 | 74.6 | 72.2 |
| 2 | 91.6 | 87.6 | 51.1 | 48.9 | 79.4 | 76.8 |
| 2 1/4 | 102.6 | 98.1 | 57.2 | 54.7 | 88.9 | 86.1 |
| 2 1/2 | 113.6 | 108.6 | 63.6 | 61 | 98.4 | 95.2 |
| 2 3/4 | 124.6 | 119.1 | 70.1 | 67.2 | 108 | 104.4 |
| 3 | 135.6 | 129.6 | 76.5 | 73.5 | 117.5 | 113.7 |
2024 - T4 Screws Sizes
BS 2470 6262-T9 Hexagon Socket Head Screw (1936 SERIES) G
| Aluminum Screw Size and Thread Dia D |
Thread Pitch | Length of Thread B |
Head diameter dk |
Diameter of unthreaded shank dw |
Head Thickness k |
Width across flats s |
Radius under head r |
Hex socket depth t |
Wall thickness w |
|||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| UNC | UNF | min | max. | min. | max. | min. | max. | min. | nom. | max. | min. | min. | min. | |
| 0 | - | 8000% | 0.5 | 0.096 | 0.093 | 0.6 | 0.0568 | 0.06 | 0.057 | 0.05 | 0.007 | 0.003 | 0.025 | 0.019 |
| 1 | 64 | 7200% | 0.625 | 0.118 | 0.114 | 0.073 | 0.0695 | 0.073 | 0.07 | 0.05 | 0.007 | 0.003 | 0.031 | 0.023 |
| 2 | 56 | 6400% | 0.625 | 0.14 | 0.136 | 0.086 | 0.0822 | 0.086 | 0.083 | 1/161/16 | 0.008 | 0.004 | 0.038 | 0.028 |
| 3 | 48 | 5600% | 0.625 | 0.161 | 0.157 | 0.099 | 0.0949 | 0.099 | 0.095 | 5/645/64 | 0.008 | 0.004 | 0.044 | 0.032 |
| 4 | 40 | 4800% | 0.75 | 0.183 | 0.178 | 0.112 | 0.1075 | 0.112 | 0.108 | 5/645/64 | 0.009 | 0.005 | 0.051 | 0.036 |
| 5 | 40 | 4400% | 0.75 | 0.205 | 0.2 | 0.125 | 0.1202 | 0.125 | 0.121 | 3/323/32 | 0.01 | 0.006 | 0.057 | 0.04 |
| 6 | 32 | 4000% | 0.75 | 0.226 | 0.221 | 0.138 | 0.1329 | 0.138 | 0.134 | 3/323/32 | 0.01 | 0.006 | 0.064 | 0.044 |
| 8 | 32 | 3600% | 0.875 | 0.27 | 0.265 | 0.164 | 0.1585 | 0.164 | 0.159 | 1/81/8 | 0.012 | 0.007 | 0.077 | 0.052 |
| 10 | 24 | 3200% | 0.875 | 5/165/16 | 0.306 | 0.19 | 0.184 | 0.19 | 0.185 | 5/325/32 | 0.014 | 0.009 | 0.09 | 0.061 |
| 12 | 24 | 2800% | 0.875 | 0.343 | 0.332 | 0.216 | 0.21 | 0.216 | 0.201 | 5/325/32 | 0.014 | 0.009 | 0.11 | 0.074 |
| 1/41/4 | 20 | 2800% | 1 | 3/83/8 | 0.367 | 0.25 | 0.2435 | 1/41/4 | 0.233 | 3/163/16 | 0.014 | 0.009 | 0.12 | 0.08 |
| 5/165/16 | 18 | 2400% | 1.125 | 7/167/16 | 0.429 | 0.3125 | 0.3053 | 5/165/16 | 0.306 | 7/327/32 | 0.017 | 0.012 | 0.151 | 0.1 |
| 3/83/8 | 16 | 2400% | 1.25 | 9/169/16 | 0.553 | 0.375 | 0.3678 | 3/83/8 | 0.368 | 5/165/16 | 0.02 | 0.015 | 0.182 | 0.12 |
| 7/167/16 | 14 | 2000% | 1.375 | 5/85/8 | 0.615 | 0.4375 | 0.4294 | 7/167/16 | 0.43 | 5/165/16 | 0.023 | 0.018 | 0.213 | 0.14 |
| 43467 | 13 | 2000% | 1.5 | 43528 | 0.739 | 0.5 | 0.4919 | 43467 | 0.492 | 43532 | 0.026 | 0.02 | 0.245 | 0.16 |
| 43724 | 12 | 1800% | 1.625 | 0.812 | 0.795 | 0.5625 | 0.554 | 0.562 | 0.553 | 43532 | 0.03 | 0.022 | 0.276 | 0.18 |
| 43593 | 11 | 1800% | 1.75 | 43654 | 0.863 | 0.625 | 0.6163 | 43593 | 0.616 | 43467 | 0.032 | 0.024 | 0.307 | 0.2 |
| 43528 | 10 | 1600% | 2 | 1 | 0.987 | 0.75 | 0.7406 | 43528 | 0.74 | 43724 | 0.039 | 0.03 | 0.37 | 0.24 |
| 43654 | 9 | 1400% | 2.25 | 1.1/8 | 1.111 | 0.875 | 0.8647 | 43654 | 0.864 | 43724 | 0.044 | 0.034 | 0.432 | 0.28 |
| 1 | 8 | 14/12 | 2.5 | 1.5/16 | 1.297 | 1 | 0.98861 | 1 | 0.988 | 43593 | 0.05 | 0.04 | 0.495 | 0.32 |
| 1.1/8 | 7 | 1200% | 1.5 | 1.125 | 1.1086 | 1.125 | 1.111 | 43528 | 0.557 | 0.428 | ||||
| 1.1/4 | 7 | 1200% | 1.75 | 1.25 | 1.2336 | 1.25 | 1.236 | 43528 | 0.62 | 0.475 | ||||
| 1.3/8 | 6 | 1200% | 1.875 | 1.375 | 1.3568 | 1.375 | 1.36 | 43528 | 0.682 | 0.523 | ||||
| 1.1/2 | 6 | 1200.00% | 2 | 1.5 | 1.4818 | 1.5 | 1.485 | 1 | 0.745 | 0.57 | ||||
| 1.3/4 | 5 | - | 2.5 | 1.75 | 1.7295 | 1.75 | 1.734 | 1.1/4 | 0.87 | 0.665 | ||||
| 2 | 4.1/2 | - | 2.75 | 2 | 1.978 | 2 | 1.983 | 1.3/8 | 0.995 | 0.76 | ||||
Aluminum Bolt Torque Chart
| Maximum Torque - Aluminium in Nm | ||||||
| Thread Dia. | 3mm | 4mm | 5mm | 6mm | 8mm | 10mm |
| Dome Head / Fairing Bolt | n/a | 2.50 | 4.00 | 5.00 | 8.50 | 16.00 |
| Flanged Bolt (Hex Head) | n/a | n/a | 6.00 | 8.00 | 12.00 | 20.00 |
| Socket Cap Bolt | 1.50 | 3.50 | 6.00 | 6.00 | 10.00 | n/a |
| Countersunk Bolt | n/a | 2.00 | 2.50 | 5.00 | 8.00 | n/a |
6262-T9 Washer Sizes
| Aluminum USS Flat Washers | |||
|---|---|---|---|
| Size | ID | OD | Thickness |
| 3/16 | 1/4" | 9/16" | 3/64" |
| 1/4 | 5/16" | 3/4" | 1/16" |
| 5/16 | 3/8" | 7/8" | 5/64" |
| 3/8 | 7/16" | 1" | 5/64" |
| 7/16 | 1/2" | 1-1/4" | 5/64" |
| 1/2 | 9/16" | 1-3/8" | 7/64" |
| 9/16 | 5/8" | 1-1/2" | 7/64" |
| 5/8 | 11/16" | 1-3/4" | 9/64" |
| 3/4 | 13/16" | 2" | 5/32" |
| 7/8 | 15/16" | 2-1/4" | 1/64" |
| 1 | 1-1/16" | 2-1/2" | 11/64" |
| 1-1/8 | 1-1/4" | 2-3/4" | 11/64" |
| 1-1/4 | 1-3/8" | 3" | 11/64" |
| 1-3/8 | 1-1/2" | 3-1/4" | 3/16" |
| 1-1/2 | 1-5/8" | 3-1/2" | 3/16" |
| 1-5/8 | 1-3/4" | 3-3/4" | 3/16" |
| 1-3/4 | 1-7/8" | 4" | 3/16" |
| 2 | 2-1/8" | 4-1/2" | 3/16" |
| 2-1/2 | 2-5/8" | 4-1/2" | 3/16" |
| 3 | 3-1/8" | 5-1/2" | 9/32" |
7075-T73 Bolts Sizes
ASME B18.2.1 Aluminum 7075 Hex Bolt size (Inch Series)
| Size in Inch | Aluminum Hex Bolt Diameter [in] |
6061-T6 Aluminum Bolt Width Across Flats | 2024 - T4 Bolt Head Height | ||
|---|---|---|---|---|---|
| Nominal [in] | Min. [in] | Nominal [in] | Min. [in] | ||
| 1/4" | 0.2500 | 7/16"(0.438) | 0.425 | 11/64" | 0.150 |
| 5/16" | 0.3125 | 1/2"(0.500) | 0.484 | 7/32" | 0.195 |
| 3/8" | 0.3750 | 9/16"(0.562) | 0.544 | 1/4" | 0.226 |
| 7/16" | 0.4375 | 5/8"(0.625) | 0.603 | 19/64" | 0.272 |
| 1/2" | 0.5000 | 3/4"(0.750) | 0.725 | 11/32" | 0.302 |
| 5/8" | 0.6250 | 15/16"(0.938) | 0.906 | 27/64" | 0.378 |
| 3/4" | 0.7500 | 1-1/8"(1.125) | 1.088 | 1/2" | 0.455 |
| 7/8" | 0.8750 | 1-5/16"(1.312) | 1.269 | 37/64" | 0.531 |
| 1" | 1.0000 | 1-1/2"(1.500) | 1.450 | 43/64" | 0.591 |
| 1-1/8" | 1.1250 | 1-11/16"(1.688) | 1.631 | 3/4" | 0.658 |
| 1-1/4" | 1.2500 | 1-7/8"(1.875) | 1.812 | 27/32" | 0.749 |
| 1-3/8" | 1.3750 | 2-1/16"(2.062) | 1.994 | 29/32" | 0.810 |
| 1-1/2" | 1.5000 | 2-1/4"(2.250) | 2.175 | 1" | 0.902 |
| 1-5/8" | 1.6250 | 2-7/16"(2.438) | 2.356 | 1-3/32" | 0.978 |
| 1-3/4" | 1.7500 | 2-5/8"(2.625) | 2.538 | 1-5/32" | 1.054 |
| 1-7/8" | 1.8750 | 2-13/16"(2.812) | 2.719 | 1-1/4" | 1.130 |
| 2" | 2.0000 | 3"(3.000) | 2.900 | 1-11/32" | 1.175 |
Chemical Composition of Aluminum Hex Bolts
| Grade | Si | Fe | Cu | Mn | Zn | Mg | Cr | Ti | OTHERS | OTHERS | Al |
|---|---|---|---|---|---|---|---|---|---|---|---|
| EACH | TOTAL | MIN. | |||||||||
| 1100 | 0.95 Si + Fe | 0.05-0.20 | 0.05 | 0.10 | - | - | - | 0.05 | 0.15 | 99.00 | |
| 2024 | 0.50 | 0.50 | 3.8-4.9 | 0.30-0.9 | 0.25 | 1.2-1.8 | 0.10 | 0.15 | 0.05 | 0.15 | Rem. |
| 3003 | 0.6 | 0.7 | 0.05-0.20 | 1.0-1.5 | 0.10 | - | - | - | 0.05 | 0.15 | Rem. |
| 6061 | 0.40-0.8 | 0.7 | 0.15-0.40 | 0.15 | 0.25 | 0.8-1.2 | 0.04-0.35 | 0.15 | 0.05 | 0.15 | Rem. |
| 7075 | 0.40 | 0.50 | 1.2-2.0 | 0.30 | 5.1-6.1 | 2.1-2.9 | 0.18-0.28 | 0.20 | 0.05 | 0.15 | Rem. |
Mechanical Properties of Aluminum Nut Bolt
| Alloy and Temper | Bolt thickness range of stock material, inches | Tensile strength, psi | Tensile yield stress, psi | Elongation in 2 inches or 4D, percent | Shear strength, psi | ASTM material designation |
|---|---|---|---|---|---|---|
| 6061-T6 | 0.063-1.000 0.125-8.000 |
42,000 42,000 |
35,000 35,000 |
10 10 |
25,000 25,000 |
B 316-68 B 211-68 |
| 2024 - T4 | 0.063-1.000 0.125-6.500 |
62,000 62,000 |
40,000 40,000 |
10 10 |
37,000 37,000 |
B 316-68 B 211-68 |
| 6262-T9 | 0.125-2.000 2.001-3.000 |
52,000 50,000 |
48,000 46,000 |
5 5 |
30,000 29,000 |
B 211-68 B 211-68 |
| 7075-T73 | 0.375-1.000 | 68,000 | 56,000 | 12 | 40,000 | - |
Aluminum Fasteners Price List
| Products | FOB Price US $ |
|---|---|
| Aluminum Profile T Slot Nut | US $0.05-$0.10/ Piece |
| Knurled Flat Head Aluminum Rivet Nut | US $0.012-$2.50/ Piece |
| DIN976 DIN 976 Aluminium Threaded Rod/ Stud Bolts | US $0.20/ Piece |
| 10 mm T Slot Hammer Nuts M4/M5/M6/M8 use for aluminum profile 4545 | US $0.03-$0.07/ Piece |
| Aluminium threaded rivet inserts rivnut fasteners nutserts | US $0.02-$0.03/ Piece |
Call us or send us an email to sales@jigneshsteel.com for more details. Always compare our price with other Aluminum Fasteners manufacturers in India or China
- Stainless Steel Bolts
- Stainless Steel Nut
- Stainless Steel Screw
- Stainless Steel Washer
- 17-4 PH Stainless Steel Bolts
- A286 Stainless Steel Fasteners
- Duplex 2205 Bolts
- Super Duplex Bolts
- Nickel Alloy Fasteners
- Titanium Bolts
- Silicon Bronze Bolts
- Copper Bolts
- High Tensile Fasteners
- Carbon Steel Bolts
- Alloy Steel Bolts
- Aluminum Fasteners
- Phosphor Bronze Fasteners
- Phosphor Bronze Washers
- Aluminium Bronze Fasteners
- Copper Nickel Fasteners
- Mp35n Bolts
- PTFE Coated Bolts
- Types of Fasteners
- Fastener Standards
- Nut Bolt Weight Calculator
- Stud weight calculator
