410 Stainless Steel Fasteners

+(91) 022-6659 5844
sales@jigneshsteel.com

Type 410 Stainless Steel Bolts manufacturer in India

Stainless Steel 410 Fasteners are used in applications with high wear and tear. The ASTM A194 SS 410 Fasteners are suitable for high temperature services with elevated temperatures, but with mild corrosive conditions. We are a manufacturer and supplier of this grade of martensitic bolts and nuts. The 410 Stainless Steel screws are abrasion resistant and they tend to wear out less with applications. We manufacture and sell different kinds of bolts in this material grade.

The ASTM A193 410 Stainless Steel Hex Bolts are one of different types of bolts that we produce. The hex bolts are used in applications where the tightening of the bolt is required to be as high as possible. Jignesh Steel manufactures different 410 Stainless Steel Fasteners sizes and types including bolts, nuts, studs and buckles. Our UNS S41000 AISI 410 Bolt types are magnetic and could be cold and hot treated without losing the magnetism. We manufacture the SS 410 1.4006 Hex Bolt is produced from the hardened hex bars of the same material grade. In the similar manner, the SS UNS S41000 Square Bolt is produced from the square bars. Due to the high wear and tear resistance of this martensitic material grade, these bolts and nuts are used in applications with high wear and tear such as the transportation and automobile applications.

EN 1.4006 Stainless Steel Fasteners

410 Stainless Steel Fasteners

AISI 410 Threaded Rod and Studs

410 Stainless Steel Hex Bolt

AISI 410 UNS S41000 Stud Bolt

ASTM A479 UNS S41000 Nuts

Buy UNS S41000 AISI 410 Hex Bolt, Threaded Rod, Nuts and Stud Bolts in specific size at best price in Mumbai

410 Stainless Steel Fasteners Price List India
EN 1.4006 Stainless Steel Fasteners Specifications
Types of SS 410 Bolts
AISI 410 Nuts Types
410 Stainless Steel Screws Types
Types of AISI 410 UNS S41000 Threaded Rod and Studs
Different types of ASTM A479 UNS S41000 Washers
Type 410 Stainless Steel Carriage Bolts Dimensions
410 SS Double End Stud Bolts Weight Chart
ASTM A276 UNS S41000 Hex Coupling Nuts Dimensions
ISO 7089 Stainless Steel 410 Flat Washer Dimensions
UNS S41000 Stainless Steel Fasteners Chemical Composition
SS 410 Grade Bolts Mechanical Properties
410 Martensitic Stainless Steel Nut Bolt Equivalent Grade

410 Stainless Steel Fasteners Price List India

Stainless Steel 410 Self Drilling Screw in Coarse & Fine thread

Material	Price in India
Stainless Steel 410 Self Drilling Screws, PHILLIPS PAN HEAD, SIZE: 4.8 x 16MM	INR 971/kg
410 Stainless Steel Self Drilling Screws, DRILL POINT, PHILLIPS PAN HEAD, SIZE: 4.8 x 20MM	INR 880/kg

Call us or send us an email to sales@jigneshsteel.com.

EN 1.4006 Stainless Steel Fasteners Specifications

EN 1.4006 Stainless Steel Bolts	ANSI B18.2.1, DIN 931/ 933
SS 410 Hex Bolts Size Metric	Dia: M10 - M110 Length: 12 - 1200MM
AISI 410 Hex Bolts Size Inch	Dia: 1/2" - 4.0" Length: 1/2" - 52"
410 Stainless Steel Eye Bolts Metric Size	Dia: M10 - M48
AISI 410 UNS S41000 Stud Bolt Metric Size	Dia: M10 - M110 Length: 12 mm - 6000 mm
ASTM A479 UNS S41000 Stud Bolt Inch	Dia: 1/2" - 4.1/2" Length: 1/2" - 236"
Type 410 Stainless Steel Hex Nut (DIA)	Metric: M6 - M110 Inch: 1/4" - 4.5"
410 SS Plain Washer (DIA)	Metric: M6 - M110 Inch: 1/2" - 4.1/2"
410 Stainless Steel Fasteners International Standard	IS, ANSI, ASTM DIN, ISO, JIS, GB, ASME, BS, UNI
ASTM A276 UNS S41000 Bolts Standard Sizes	M10, M4, M16, M36 M2.5, M6, M30, M12, M8, M14, M2, M3, M20, M24, M5 to M160
Stainless Steel 410 Fasteners Threads	BSF, UNF METRIC, UNC, UNEF, BSW or as required
ASME/ ANSI - American Standard 410 Stainless Steel Fasteners	ANSI B 28.2.4 1M ANSI B 18.2.4 2M ASME B18.5 ASME B18.2.2
DIN German Standard 410 Stainless Steel Fasteners	DIN 933, DIN 931, DIN 970, DIN 934
ISO Standard UNS S41000 Stainless Steel Bolts	ISO 4033, : ISO 4032, JIS standards
SS 410 Grade Bolts / Screws Head Drive	Phillips, Slotted, Phillips/Slot, Six-Lobe
MTC (Manufacturer Test Certificate)	EN 10204 / 3.1
410 Martensitic Stainless Steel Nut Bolt Finishing	Zinc white, (yellow, black, blue), black oxide, Dacroment, Geometry, plated zinc-nickel, anodizing, nickel plated, Stainless steel: Passivated Self-Colour, Bright Zinc Plated (BZP), Hot Dip Galvanised (HDG), Sherardized, DACROMET and Mechanically Applied coating
Grade 410 stainless Fasteners Production Process	M2-M24: Cold Forging, hot forging M24-M100, machining and CNC for Customized connecting element
410 Stainless Steel Fasteners Coating	Xylon Coated Fasteners Phosphate Coated Fasteners Hot Dipped Galvanizing Coated Fasteners Teflon Coated Fasteners Zinc Coated Fasteners Cadmium Coated Fasteners Ptfe Coated (Teflon) Fasteners
Martensitic Stainless Steel Grade 410 Fasteners Packing	Wooden Pallet, Canton, Carton / Small Box or as required

Types of SS 410 Bolts

Type 410 Stainless Steel Screws supplier & exporter in India, don't forget to compare our quality & price with other 410 Stainless Steel Fasteners manufacturers in India

EN 1.4006 Stainless Steel Flange Bolts

SS 410 Heavy Hex Bolts

AISI 410 Hex Bolts

410 Stainless Steel Square Bolts

AISI 410 UNS S41000 U Bolts

ASTM A479 UNS S41000 Eye Bolts

EN 1.4006 Stainless Steel Lag Bolts

SS 410 Anchor Bolts

AISI 410 Hex Head Bolts

410 Stainless Steel Carriage Bolts

AISI 410 UNS S41000 Allen Cap Bolt

ASTM A479 UNS S41000 Countersunk Bolts

AISI 410 Nuts Types

EN 1.4006 Stainless Steel Eye Nuts

SS 410 Heavy Hex Nuts

AISI 410 Hex Nuts

410 Stainless Steel Jam Nuts

AISI 410 UNS S41000 Lock Nuts

ASTM A479 UNS S41000 Panel Nuts

Type 410 Stainless Steel Square Nuts

410 SS T-Nuts For Wood

ASTM A276 UNS S41000 Wheel Nuts and Caps

Stainless Steel 410 Wing Nuts

UNS S41000 Stainless Steel Cage Nuts and Spring Nuts

SS 410 Grade Self Locking Nuts

410 Stainless Steel Screws Types

410 Screws are manufactured from martensitic grade stainless steel. Martensitic grades of stainless steel provide the 410 Stainless Steel Self Drilling Screw with increased corrosion resistance. Further the 410 Stainless Steel Cap Screws are hardenable by heat treatment. Chemically, 410 Stainless Steel Concrete Screws are an Iron, chromium and carbon based alloy. The 410 Stainless Steel Screws are similar to carbon alloy steels or low alloy steels and have a structure similar to that of ferritic grade stainless steels. The main alloying components for the 410 Stainless Steel Machine Screws are 10.5 % to 18 % chromium, 0.2 % to 1 % molybdenum and 0.1 % to 1.2 % carbon. Most martensitic stainless steel grades do not contain nickel in their alloys. Similarly the Stainless Steel 410 Screw does not have any nickel content in its alloy. The addition of carbon to the 410 Stainless Steel Set Screws, along with a heat treatment grants them similar hardness and strength properties as carbon steels.

Type 410 Stainless Steel Screws
The features of martensitic grade 410 SS Screws include enhanced mechanical properties like good tensile strength, high creep strength, and fatigue strength properties. This in combination with its moderate resistance to corrosion and increased heat resistance up to a temperature of 650 degree C makes the 410 Stainless Steel Tek Screws well suited to applications where the steel is exposed to constant wear and corrosive media.

410 Martensitic Stainless Steel Tek Screws

Grade 410 stainless Deck Screws

Martensitic Stainless Steel Grade 410 Concrete Screws

Alloy 410 SS Socket Head Cap Screw

EN 1.4006 Stainless Steel Eye Screw

SS 410 Thumb Screw

AISI 410 Wood Screw

410 Stainless Steel Coach Screw

AISI 410 UNS S41000 Hex Head Lag Screw

ASTM A479 UNS S41000 12-Point Flange Head Cap Screws

Type 410 Stainless Steel Wing Screw

410 SS Captive Panel Screws

ASTM A276 UNS S41000 Hex Cap Screw

Stainless Steel 410 Allen Cap Screw

UNS S41000 Stainless Steel Grub Screw

SS 410 Grade Fully Threaded Screw

410 Martensitic Stainless Steel Torx Screw

Grade 410 stainless Pan Head Screw

Martensitic Stainless Steel Grade 410 Truss Head Screw

Alloy 410 SS Flat Head Screw

Types of AISI 410 UNS S41000 Threaded Rod and Studs

SS 410 Washers & 1.4006 410 Stainless Steel Cap Screws at factory price

EN 1.4006 Stainless Steel Stud Bolts

SS 410 Double Ended Studs

AISI 410 Tie Rod

410 Stainless Steel Fully Threaded Studs

AISI 410 UNS S41000 Threaded Rod

ASTM A479 UNS S41000 Unc Stud Bolt

Different types of ASTM A479 UNS S41000 Washers

EN 1.4006 Stainless Steel Cup Washer

SS 410 Square Washer

AISI 410 Lock Washer

410 Stainless Steel Countersunk Washer

AISI 410 UNS S41000 Belleville Washer

ASTM A479 UNS S41000 Shim Washer

Type 410 Stainless Steel Square Plate Washer

410 SS Square Washer

ASTM A276 UNS S41000 Penny Washer

Stainless Steel 410 Machine Washers

Polished UNS S41000 Stainless Steel Washer

SS 410 Grade Ring Washers

Type 410 Stainless Steel Carriage Bolts Dimensions

Carriage Bolt Dia	D		C		H		P		F
	Body Dia		Head Dia		Head Height		Square Width		Square Depth
	Max	Min	Max	Min	Max	Min	Max	Min	Max	Min
1⁄2	0.515	0.483	1.094	1.032	0.270	0.250	0.515	0.492	0.281	0.250
5⁄8	0.642	0.605	1.344	1.219	0.344	0.313	0.642	0.616	0.344	0.313
3⁄4	0.768	0.729	1.594	1.469	0.406	0.375	0.768	0.741	0.406	0.375
7⁄8	0.895	0.852	1.844	1.719	0.469	0.438	0.895	0.865	0.469	0.438
1	1.022	0.976	2.094	1.969	0.531	0.500	1.022	0.990	0.531	0.500
11⁄4*	1.277		2.850		0.531	0.500	1.250		0.625

*Dimensions as per ASME B18.5 1990 (R 1998) cover up to 1" dia.

410 SS Double End Stud Bolts Weight Chart

SIZE RANGE	WEIGHT PER HEX NUT	STUD WEIGHT PER INCH
1/4	.012	.020
5/16	.017	.021
3/8	.032	.0244
7/16	.042	.0333
1/2	.065	.0445
9/16	.082	.0702
5/8	.119	.0706
3/4	.193	.1030
7/8	.297	.1417
1	.425	.1858
1 1/8	.592	.2401
1 1/4	.786	.3016
1 3/8	1.02	.3698
1 1/2	1.31	.4436
1 5/8	1.62	.5257
1 3/4	2.04	.6143
1 7/8	2.41	.7102
2	2.99	.8131
2 1/4	4.19	1.0366
2 1/2	5.64	1.2936
2 3/4	7.38	1.5787
3	9.5	1.8883
3 1/4	11.94	2.225
3 1/2	13.7	2.592

ASTM A276 UNS S41000 Hex Coupling Nuts Dimensions

Dimensions as per ASME B18.2.2 2010

Nominal Size	F			C		H
	Width Across Flats			Width Across Corners		Length/ Thickness
	Basic	Max	Min	Max	Min	Basic	Max	Min
1/2	11/16	0.688	0.663	0.794	0.756	13/4	1.760	1.690
5/8	13/16	0.813	0.782	0.939	0.891	21/8	2.135	2.067
3/4	1	1.000	0.963	1.155	1.097	21/4	2.260	2.190
7/8	11/4	1.250	1.212	1.443	1.382	21/2	2.510	2.440
1	13/8	1.375	1.325	1.588	1.511	23/4	2.760	2.690
11/8	11/2	1.500	1.450	1.732	1.653	3	3.010	2.940
11/4	15/8	1.625	1.575	1.876	1.825	3	3.010	2.940
11/2	2	2.000	1.950	2.309	2.275	31/2	3.510	3.440

ISO 7089 Stainless Steel 410 Flat Washer Dimensions

For Screw Metric Size	Hole Diameter (mm)	OD (mm)	Flat Washer Thickness (mm)
M1.6	1.7	4	0.3
M2	2.2	5	0.3
M2.5	2.7	6	0.5
M2.6	2.8	7	0.5
M3	3.2	7	0.5
M3.5	3.7	8	0.5
M4	4.3	9	0.8
M5	5.3	10	1
M6	6.4	12	1.6
M7	7.4	14	1.6
M8	8.4	16	1.6
M10	10.5	20	2
M12	13	24	2.5
M14	15	28	2.5
M16	17	30	3
M18	19	34	3
M20	21	37	3
M22	23	39	3
M24	25	44	4
M27	28	50	4
M30	31	56	4
M33	34	60	5
M36	37	66	5
M39	40	72	6
M42	43	78	7
M45	46	85	7
M48	50	92	8
M52	54	98	8
M56	58	105	9

UNS S41000 Stainless Steel Fasteners Chemical Composition

Grade	AISI	Stainless Steel Bolts & Nuts Chemical Composition (% maxima unless stated)
Grade	AISI	C	Si	Mn		P	S		Cr	Mo	Ni	Cu
C1	SS 410	0.09-0.15	1.0	1.0		0.05	0.03		11,5 - 14,0	-	1	-

SS 410 Grade Bolts Mechanical Properties

Type	Tensile Strength		Yield Strength (0.2% offset)		Elongation in 2” (50.80mm) %	Hardness (Rockwell)
	Ksi	MPa	Ksi	MPa
410	70	483	45	310	25	B80

Mechanical Properties for SS 410 Fasteners as per ASTM F593-91

GRADE	DESCRIPTION	FULL SIZE BOLTS, STUDS & SCREWS		MACHINED TEST SPECIMENS OF BOLTS, STUDS & SCREWS				NUTS
GRADE	DESCRIPTION	YIELD2 STRENGTH min ksi	TENSILE STRENGTH min ksi	YIELD2 STRENGTH min ksi	TENSILE STRENGTH min ksi	ELONGATION3 % Min	HARDNESS ROCKWELL Min	PROOF LOAD STRESS ksi	HARDNESS ROCKWELL Min
410	Martensitic Hardened and Tempered	95	125	95	125	20	C22	125	C22

Martensitic Stainless Steel 410 Bolts Physical Properties

Hardness, Rockwell B 1200°F	98	98	Hardened+Tempered
Hardness, Rockwell C 1000°F	35	35	Hardened+Tempered
Tensile Strength, Ultimate (Hardened 1800°F, Tempered 1000°F)	1063 MPa	154000 psi
Tensile Strength, Yield (Hardened 1800°F, Tempered 550°F)	1022 MPa	148000 psi
Elongation at Break	34 %	34 %	Annealed